The Curve Fitting app provides some example data generated from Franke's bivariate test function. This data is suitable for trying various fit settings in Curve Fitting app.
To load the example data and create, compare, and export surface fits, follow these steps:
To load example data to use in the Curve Fitting app,
load franke at the MATLAB® command line.
in your workspace.
The example data is generated from Franke's bivariate test function, with added noise and scaling, to create suitable data for trying various fit settings in Curve Fitting app. For details on the Franke function, see the following paper:
Franke, R., Scattered Data Interpolation: Tests of Some Methods, Mathematics of Computation 38 (1982), pp. 181–200.
To divide the data into fitting and validation data, enter the following syntax:
xv = x(200:293); yv = y(200:293); zv = z(200:293); x = x(1:199); y = y(1:199); z = z(1:199);
To fit a surface using this example data:
Open Curve Fitting app. Enter
or select Curve Fitting on the Apps tab.
Select the variables
z interactively in the Curve Fitting app.
you can specify the variables when you enter
open Curve Fitting app (if necessary) and create a default fit.
The Curve Fitting app plots the data points as you select variables.
When you select
the tool automatically creates a default surface fit. The default
fit is an interpolating surface that passes through the data points.
Try a Lowess fit type. Select the
type from the drop-down list in the Curve Fitting app.
The Curve Fitting app creates a local smoothing regression fit.
Try altering the fit settings. Enter
the Span edit box.
By reducing the span from the default to 10% of the total number of data points you produce a surface that follows the data more closely. The span defines the neighboring data points the toolbox uses to determine each smoothed value.
Edit the Fit name to
If you divided your data into fitting and validation data in step 2, select this validation data. Use the validation data to help you check that your surface is a good model, by comparing it against some other data not used for fitting.
Select Fit > Specify Validation Data. The Specify Validation Data dialog box opens.
Select the validation variables in the drop-down lists
for X input, Y input, and Z
Review your selected validation data in the plots and the validation statistics (SSE and RMSE) in the Results pane and the Table of Fits.
Create another fit to compare by making a copy of the current surface fit. Either select Fit > Duplicate "Smoothing regression", or right-click the fit in the Table of Fits, and select Duplicate
The tool creates a new fit figure with the same fit settings, data, and validation data. It also adds a new row to the table of fits at the bottom.
Change the fit type to
edit the fit name to
Change the Degrees of x and y to
to fit a cubic polynomial in both dimensions.
Look at the scales on the x and y axes, and read the warning message in the Results pane:
Equation is badly conditioned. Remove repeated data points or try centering and scaling.
Select the Center and scale check box to normalize and correct for the large difference in scales in x and y.
Normalizing the surface fit removes the warning message from the Results pane.
Look at the Results pane. You can view (and copy if desired):
The model equation
The values of the estimated coefficients
The goodness-of-fit statistics
The goodness of validation statistics
Linear model Poly33: f(x,y) = p00 + p10*x + p01*y + p20*x^2 + p11*x*y... + p02*y^2 + p30*x^3 + p21*x^2*y + p12*x*y^2 + p03*y^3 where x is normalized by mean 1977 and std 866.5 and where y is normalized by mean 0.4932 and std 0.29 Coefficients (with 95% confidence bounds): p00 = 0.4359 (0.3974, 0.4743) p10 = -0.1375 (-0.194, -0.08104) p01 = -0.4274 (-0.4843, -0.3706) p20 = 0.0161 (-0.007035, 0.03923) p11 = 0.07158 (0.05091, 0.09225) p02 = -0.03668 (-0.06005, -0.01332) p30 = 0.02081 (-0.005475, 0.04709) p21 = 0.02432 (0.0012, 0.04745) p12 = -0.03949 (-0.06287, -0.01611) p03 = 0.1185 (0.09164, 0.1453) Goodness of fit: SSE: 4.125 R-square: 0.776 Adjusted R-square: 0.7653 RMSE: 0.1477 Goodness of validation: SSE : 2.26745 RMSE : 0.155312
To export this fit information to the workspace, select Fit > Save to Workspace. Executing this command also exports other information such as the numbers of observations and parameters, residuals, and the fitted model.
You can treat the fitted model as a function to make predictions or evaluate the surface at values of X and Y. For details see Exporting a Fit to the Workspace.
Display the residuals plot to check the distribution of points relative to the surface. Click the toolbar button or select View > Residuals Plot.
Right-click the residuals plot to select the Go to X-Z view. The X-Z view is not required, but the view makes it easier to see to remove outliers.
To remove outliers, click the toolbar button or select Tools > Exclude Outliers.
When you move the mouse cursor to the plot, it changes to a cross-hair to show you are in outlier selection mode.
Click a point that you want to exclude in the surface plot or residuals plot. Alternatively, click and drag to define a rectangle and remove all enclosed points.
A removed plot point displays as a red star in the plots.
If you have Auto-fit selected, the Curve Fitting app refits the surface without the point. Otherwise, you can click Fit to refit the surface.
To return to rotation mode, click the toolbar button again to switch off Exclude Outliers mode.
To compare your fits side-by-side, use the tile tools. Select Window > Left/Right Tile, or use the toolbar buttons.
Review the information in the Table of Fits. Compare goodness-of-fit statistics for all fits in your session to determine which is best.
To save your interactive surface fitting session, select File > Save Session. You can save and reload sessions to access multiple fits. The session file contains all the fits and variables in your session and remembers your layout.
After interactively creating and comparing fits, you can generate code for all fits and plots in your Curve Fitting app session. Select File > Generate Code.
The Curve Fitting app generates code from your session and displays the file in the MATLAB Editor. The file includes all fits and plots in your current session.
Save the file with the default name,
You can recreate your fits and plots by calling the file from the command line (with your original data or new data as input arguments). In this case, your original variables still appear in the workspace.
Highlight and evaluate the first line of the file
(excluding the word
function). Either right-click
and select Evaluate, press F9,
or copy and paste the following to the command line:
[fitresult, gof] = createFits(x, y, z, xv, yv, zv)
The function creates a figure window for each fit you had in your session. Observe that the polynomial fit figure shows both the surface and residuals plots that you created interactively in the Curve Fitting app.
If you want you can use the generated code as a starting
point to change the surface fits and plots to fit your needs. For
a list of methods you can use, see
For more information on all fit settings and tools for comparing fits, see: