Performance
Use features of Simulink® to tune models deployed to connected Intel® SoC hardware boards. Use the features of Embedded Coder® to optimize the generated code for the Intel SoC embedded processors.
Model Settings
Topics
- Host-Target Communication with External Mode Simulation
Tune parameters and monitor signals through the communication channel between development computer and target hardware.
- External Mode Simulation by Using XCP Communication
Run external mode simulations that use an XCP communication channel.
- External Mode Simulation with TCP/IP
Run external mode simulations that use a TCP/IP or serial communication channel.
- Optimize Code for ARM Cortex-A Processors
Use Ne10 Code Replacement Library for ARM® Cortex®-A Processors.
- Sending PING Request to Intel SoC Device
Process to PING an Intel SoC hardware board connected to your development computer.
Featured Examples
Real-Time Code Execution Profiling
Profile the real-time execution of generated code running as an executable on the ARM® processor in a Intel® SoC device.
Processor-in-the-Loop Verification of Simulink Models
Use Embedded Coder® Support Package for Intel® SoC Devices to verify code using PIL simulation.
