Setup and Configuration

Install hardware support package, update firmware, and configure hardware connection

The setup and configuration process includes install of the Embedded Coder^® Support Package for Infineon^® AURIX™ TC3x Microcontrollers software and install of the third-party software such as Infineon Low Level Driver (iLLD), TASKING(R) VX-toolset for TriCore, HighTec TriCore^® Development Platform, and Synopsys^® Virtualizer Development Kit to support Infineon AURIX TC3x.

With this software installed, you can set up your model to use the support package and set up communications with your target hardware or Virtual Prototyping (VP).

Functions

codertarget.aurix_target.setiLLDPrecompiledFolder() Set folder path to store precompiled iLLD library (Since R2024a)

Topics

Install Embedded Coder Support Package for Infineon AURIX TC3x Microcontrollers
Install the Embedded Coder Support Package for Infineon AURIX TC3x Microcontrollers.
What to Do After Installation
Area to explore and experiment after installation of the Embedded Coder Support Package for Infineon AURIX TC3x Microcontrollers.
Supported Hardware and Required Software
Hardware and software required when using Embedded Coder Support Package for Infineon AURIX TC3x Microcontrollers.
Change iLLD Version
Change Infineon low level driver (iLLD) version.
Map Tasks and Peripherals Using Hardware Mapping
Map tasks and peripherals in a model to hardware board configurations.