This example shows how to use the Fixed-Point Tool to compare floating-point and fixed-point data types in your model. You can use the range collection functionality to explore and troubleshoot the numerical behavior of your model for different inputs.
This tutorial uses a fixed-point direct form filter implemented using fundamental building blocks such as Gain, Delay, and Sum. The model contains a Signal Generator block that supplies a square wave input to the filter. In this tutorial, you explore the behavior of the filter for a range of signal inputs.
To open the
fxpdemo_direct_form2 example, at the MATLAB® command line, enter:
To specify multiple simulation scenarios for range collection, define a
Simulink.SimulationInput object in the base or model workspace. Define a
specifies the amplitude of the square wave input for a range of values.
simIn(1) = Simulink.SimulationInput('fxpdemo_direct_form2'); simIn(2) = Simulink.SimulationInput('fxpdemo_direct_form2'); simIn(3) = Simulink.SimulationInput('fxpdemo_direct_form2'); simIn(4) = Simulink.SimulationInput('fxpdemo_direct_form2'); simIn(5) = Simulink.SimulationInput('fxpdemo_direct_form2'); simIn(6) = Simulink.SimulationInput('fxpdemo_direct_form2'); simIn(1:6) = Simulink.SimulationInput('fxpdemo_direct_form2');
The Fixed-Point Tool collects ranges for each specified scenario and merges the results from all simulation runs. Merging allows you to explore the numerical behavior of your model over the complete simulation range.
To specify signal tolerances, enable signal logging at the output of the Sum1 block.
In the Apps tab of the
fxpdemo_direct_form2 model, select Fixed-Point
In the Fixed-Point Tool, click New > Range Collection.
Under System Under Design (SUD), select
Under Range Collection Mode, select Simulation Ranges as the range collection method.
Under Simulation Inputs, select the
you defined in the base workspace.
To specify tolerances for the system, under Signal Tolerances, specify tolerances for any signal in the model with signal logging enabled.
Set the relative tolerance (Rel Tol) of the signal that you logged to 15%.
Under Collect Ranges, select
When you collect ranges via simulation, the Fixed-Point Tool will override the data types in your model with doubles and simulate the model with instrumentation to collect minimum and maximum values for each object in your model. You can also choose to override data types with singles or scaled doubles, or use the current data type override set on the model.
Click the Collect Ranges button.
Simulink® simulates the
fxpdemo_direct_form2 model six times,
once for each amplitude of the input square wave specified in the
Simulink.SimulationInput object. The Fixed-Point Tool
automatically enables fixed-point instrumentation and overrides the data types in your
model with doubles to collect a floating-point baseline.
You can view the ranges of each simulation individually by selecting the simulation scenario in the Workflow Browser.
BaselineRun node in the Workflow
Browser shows the merged ranges from the six simulation scenarios.
Click Settings, then select
Click Simulate with Embedded Types.
The Fixed-Point Tool simulates the model once for each simulation scenario, using
the fixed-point data types specified in the model. Selecting the
EmbeddedRun node in the Workflow Browser
shows the merged results from the six simulation scenarios.
The Workflow Browser indicates that of the six simulation
EmbeddedRun_Scenario_4 met the tolerances
specified. Results with overflows are highlighted in red.
Select the Explore tab of the Fixed-Point Tool to investigate
further. Under Numerical Issues, select
Overflow, then click Execution
The Fixed-Point Tool displays only the
EmbeddedRun results with
overflows and sorts the list based on block execution order. In this example, the first
overflow occurs in the Gain4 block.
You can double-click on any row in the Results spreadsheet to highlight the block in the model.
You can compare the fixed-point and floating-point behavior of the model for a
specific simulation scenario using the Simulation Data Inspector. For example, the
Fixed-Point Tool indicates that
EmbeddedRun_Scenario_3 did not meet
the specified tolerance. To compare this embedded run to the floating-point behavior for
this simulation scenario, right-click on
select Open SDI to compare with
The Simulation Data Inspector plots the logged signal associated with the output of
Sum1 block for
EmbeddedRun_Scenario_3, as well as their difference and the
tolerance specified for this signal.