Valves and Orifices

Variable-area components for fluid flow control

Use these blocks to model orifices, valves, and valve actuators in the two-phase fluid domain.

Simscape Blocks

expand all

Directional Control Valves

Check Valve (2P)

Check valve in a two-phase fluid network

Flow Control Valves

Thermostatic Expansion Valve (2P)

Flow control valve that maintains evaporator superheat

Pressure Control Valves

Pressure Relief Valve (2P)	Pressure relief valve in a two-phase fluid network
Pressure-Reducing Valve (2P)	Pressure-reducing valve in a two-phase fluid network

Valve Actuators and Forces

Multiposition Valve Actuator	Multiposition actuator in any fluid domain
Proportional Valve Actuator	Power-controlled valve actuator in any fluid domain

Orifices

Orifice (2P)

Constant- or variable-area orifice in a two-phase fluid network

Topics

Building a Custom Valve
Model a custom valve with orifice blocks.

Featured Examples

Residential Air Source Heat Pump

Models an air source heat pump system that is used to heat a residential building having hot-water radiators for heat distribution. The two-phase fluid refrigerant takes up heat from the environment moist air mixture and transfers heat to water. The compressor drives the R410a refrigerant through a condenser, a thermostatic expansion valve, and an evaporator. An accumulator ensures that only vapor returns to the compressor.

Open Model

Residential Ground Source Heat Pump

Models a ground source heat pump system that is used to heat a residential building having hot-water radiators for heat distribution. The ground source heat pump uses R410a, a two-phase fluid refrigerant, as the working fluid. The heat pump takes up the naturally existing heat stored in the ground and transfers the heat to the hot-water radiators. The compressor drives the refrigerant through a condenser, a thermostatic expansion valve, and an evaporator. An accumulator ensures that only vapor returns to the compressor.

Open Model