Connectivity to TI mmWave Radar Sensor EVMs
Get started with basics of connecting to Texas Instruments AWR and IWR radar
sensor EVMs (Evaluation Modules)
Radar Toolbox Support Package for Texas Instruments® mmWave Radar Sensors enables you to communicate with TI’s mmWave radar sensors, configure the radar, and acquire radar data.
Functions
mmWaveRadar | Connect to Texas Instruments mmWave radar sensors, and read object detections and other measurements (Since R2023b) |
mmWaveRadarSetup | Launch Hardware Setup screens for configuring Texas Instruments mmWave radar sensors (Since R2023b) |
flush | Flush the buffer created on the host computer to store Radar data for mmWaveRadar object (Since R2023b) |
release | Stop streaming radar data and release the mmWaveRadar object (Since R2023b) |
sendCommand | Send raw serial command to TI mmWave Radar (Since R2023b) |
info | Provides the information about the outputs the radar is configured to generate (Since R2023b) |
You can also select a web site from the following list:
Americas
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)