The RF Blockset™ Idealized Baseband library extends your Simulink® simulation environment with a library of blocks to model single-carrier complex-baseband systems with discrete-time signals. You can directly couple blocks from this library with digital signal processing blocks or other Simulink blocks to estimate the impact of RF phenomena on overall system performance.
In the Simulink environment, you connect these Idealized Baseband library blocks to other Simulink blocks to represent a higher abstract level for your RF architecture.
Additionally, you can use this library with the Simulink Coder™ software to generate embeddable C code for real-time execution.
To open the top-level RF Blockset library window, type the following at the MATLAB® Command Line:
Each yellow block in the window represents a time-domain complex-baseband library with different capabilities. Double-click the Idealized Baseband icon to open the library.
Idealized Baseband library blocks assume perfect impedance matching. This implies no loading effects and that the signal and power flows are unidirectional. The blocks in this library perform as standard Simulink blocks. In contrast, the Equivalent Baseband and Circuit Envelope blocks do not assume perfect matching. These blocks are physical, model bidirectional power flow, and include loading effects and reflections at each block boundary. The Equivalent Baseband or Circuit Envelope blocks can only connect to blocks from their respective library. To interface these two libraries with Simulink blocks, Input Port and Output Port blocks are required.