Main Content

Setup for ARM Targeting with IP Core Generation Workflow

The hardware setup tool performs these steps for you. You can also manually call these commands to set up for generating embedded ARM® code by using the IP core generation workflow.

You must have Embedded Coder® and Embedded Coder Support Package for AMD SoC Devices installed.

  1. Register the root directory that is used by the cross-compilation toolchain. This toolchain is used when generating code to target the ARM portion of the Zynq device.

    setupvisionzynqsysroot() 

  2. Create a communication link to the Zynq® board. Use the IP address that you configured for your board. The generated software interface models use this link.

    zynq('Linux','192.168.4.2','root','root','/tmp');

Related Topics