Connectors and References
Grounds, neutral ports, phase splitters, multiplexers
Use connector blocks for grounding and to terminate, separate, and combine signals.
Simscape Blocks
Array of Electrical Nodes | Concatenate arrays of electrical nodes into single array of electrical nodes port (Since R2024b) |
Cable and Connectors | Cable and connectors with optional fault modeling (Since R2024b) |
Busbar | Load flow analysis busbar connector |
Busbar (DC) | Load flow analysis DC busbar connector (Since R2022a) |
Delta Reference (Three-Phase) | Internal reference point for delta-connected network |
Electrical Reference | Connection to electrical ground |
Floating Neutral (Three-Phase) | Internal floating neutral point for wye-connected network |
Floating Reference | Reference for measuring voltage of other nodes in floating electrical network (Since R2023b) |
Grounded Neutral (Three-Phase) | Connect phases of three-phase system to electrical reference |
Neutral Port (Three-Phase) | Connect phases of three-phase system to electrical conserving port |
Open Circuit | Electrical port terminator that draws no current |
Open Circuit (Three-Phase) | Three-phase terminator that draws no current |
Phase Permute | Permute phases of three-phase system |
Phase Splitter | Expand or combine three electrical conserving ports |
PS Three-Element Demux | Convert three-element physical signal vector into scalar physical signals |
Topics
- Essential Electrical Modeling Techniques
Apply Simscape™ modeling rules when you build electronic, mechatronic, and electrical power system networks using Simscape Electrical™.
- Three-Phase Ports
Connect three-phase blocks using composite ports for three-phase lines or expanded ports for single-phase lines.