Connectors and References
Use connector blocks for grounding and to terminate, separate, and combine signals.
|Busbar||Load flow analysis busbar connector (Since R2019b)|
|Busbar (DC)||Load flow analysis DC busbar connector (Since R2022a)|
|Delta Reference (Three-Phase)||Internal reference point for delta-connected network|
|Electrical Reference||Connection to electrical ground|
|Floating Neutral (Three-Phase)||Internal floating neutral point for wye-connected network|
|Floating Reference||Reference for measuring voltage of other nodes in floating electrical network (Since R2023b)|
|Grounded Neutral (Three-Phase)||Connect phases of three-phase system to electrical reference|
|Neutral Port (Three-Phase)||Connect phases of three-phase system to electrical conserving port|
|Open Circuit||Electrical port terminator that draws no current|
|Open Circuit (Three-Phase)||Three-phase terminator that draws no current|
|Phase Permute||Permute phases of three-phase system|
|Phase Splitter||Expand or combine three electrical conserving ports|
|PS Three-Element Demux||Convert three-element physical signal vector into scalar physical signals|
- Essential Electrical Modeling Techniques
Apply Simscape™ modeling rules when you build electronic, mechatronic, and electrical power system networks using Simscape Electrical™.
- Three-Phase Ports
Connect three-phase blocks using composite ports for three-phase lines or expanded ports for single-phase lines.