ADC 1, ADC 2, and ADC 3
Use the three ADC1, ADC2, and ADC3 parameters to configure the sample time in ADDCLK cycles for different channels.
Conversion resolution
The resolution that you select for conversion.
Settings
Default:
12-bits
Select data alignment
The option that you select for the alignment of data after conversion. The data can be right or left aligned.
Settings
Default:
Right alignment
Enable watchdog on regular channels
The option you select to enable the watchdog on regular channels.
Settings
Default:
off
on
Enable watchdog on injected channels
The option you select to enable the watchdog on injected channels.
Settings
Default:
off
on
Watchdog on channel
The option to select channel for watchdog.
Settings
Default:
All channels
Watchdog lower threshold
The lower threshold of the watchdog.
Settings
Default:
0
Watchdog higher threshold
The higher threshold of the watchdog.
Settings
Default:
4095
Channel # sampling time in ADCCLK cycles
The sampling time that you select in ADCCLK cycles for channel numbers from 1 to 18.
Settings
Default:
3
See Also
Model Configuration Parameters for STMicroelectronics STM32F4-Discovery Board | Model Configuration Parameters for STMicroelectronics STM32F746G-Discovery Board | Model Configuration Parameters for STMicroelectronics STM32F769I-Discovery Board