Modélisation basée sur des normes

FM Broadcast Receiver

Build an FM mono or stereo receiver using recorded data or real-time signals with an RTL-SDR, ADALM-PLUTO, or USRP™ radio.

FM Broadcast Receiver in Simulink

Build an FM mono or stereo receiver using recorded data or real-time signals with an RTL-SDR, ADALM-PLUTO, or USRP radio.

RDS/RBDS and RadioText Plus (RT+) FM Receiver

Extract program or song information from FM radio stations using RDS or RBDS, and optionally RT+, standards by processing previously captured signals or receiving over-the-air signals in real time with an RTL-SDR, ADALM-PLUTO, or USRP radio.

RDS/RBDS and RadioText Plus (RT+) FM Receiver in Simulink

Extract program or song information from FM radio stations using RDS or RBDS, and optionally RT+, standards by processing previously captured signals or receiving over-the-air signals in real time with an RTL-SDR, ADALM-PLUTO, or USRP radio.

WLAN Beacon Receiver Using Software-Defined Radio

Retrieve information about WiFi networks on the 5 GHz band using a software-defined radio.

(WLAN Toolbox)

LTE Transmitter Using Software Defined Radio

Generate a reference measurement channel (RMC) downlink (DL) LTE waveform suitable for over-the-air transmission. This example also shows how to use a software-defined radio (SDR) to transmit the generated waveform using single or multiple antennas.

(LTE Toolbox)

LTE Receiver Using Software-Defined Radio

Recover the master information block (MIB) and basic system information from an over-the-air LTE downlink (DL) waveform. This example also shows how to receive an LTE waveform using a software-defined radio (SDR) with single or multiple antennas.

(LTE Toolbox)

Ship Tracking Using AIS Signals

Track ships by processing automatic identification system (AIS) signals, using either previously captured signals or real-time reception with an RTL-SDR, ADALM-PLUTO, or USRP radio, and display the tracked ships on a map with the Mapping Toolbox™.

Airplane Tracking Using ADS-B Signals

Track planes by processing automatic dependent surveillance-broadcast (ADS-B) signals, using either previously captured signals or real-time reception with an RTL-SDR, ADALM-PLUTO, or USRP radio, and visualize them on a map with the Mapping Toolbox.

Airplane Tracking Using ADS-B Signals in Simulink

Track planes by processing automatic dependent surveillance-broadcast (ADS-B) signals, using either previously captured signals or real-time reception with an RTL-SDR, ADALM-PLUTO, or USRP radio, and visualize them on a map with the Mapping Toolbox.