How can I simulate contact heat conduction between two layers of different materials in Simscape?
20 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
The Conductive Heat Transfer block can only represent a heat transfer by conduction between two layers of same material. So how can I simulate contact heat conduction between two layers of different materials?
0 commentaires
Réponses (2)
noman shah
le 15 Juil 2015
i had'nt worked on simscape thermal but i think all you have to do is to use 2 units of conductive heat transfer connect both in series and use thermal conductivities of both materials in both the units
0 commentaires
Philipp Wälchli
le 12 Avr 2019
Has the answer above resulted in the wished behaviour? I am wondering the same and would like to get advice in this perspective.
2 commentaires
Chuan Liu
le 12 Avr 2019
Hi Philipp,
In new versions (probably from 2017 or 2018), they introduced a new 'thermal resistance' element. You can use it to setup the thermal contact resistance. You have to calculate it by yourself of course.
Philipp Wälchli
le 12 Avr 2019
Modifié(e) : Philipp Wälchli
le 12 Avr 2019
Thank you ! That's a good alternative
May you also be able to help me with the question I have here: https://ch.mathworks.com/matlabcentral/answers/452391-simulink-thermal-conductance-in-a-pv-system
Voir également
Catégories
En savoir plus sur Simulation Setup dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!