Réponse apportée
MATLAB GPU UBUNTU 20.04 compatibility CUDA driver
Try the 555 and 550 drivers recommended for your device available from https://www.nvidia.com/en-gb/drivers/, rather than relyin...

5 mois il y a | 0

Réponse apportée
Memory leak occurring when repeatedly performing matrix left division on GPU
Thank you very much for reporting this. This appears to be a bug in MATLAB's gpuArray support for overdetermined solves. For now...

6 mois il y a | 0

| A accepté

Réponse apportée
How do I use multiple inputs in mexcuda?
You have passed in two inputs but you have a check if (nrhs!=1), so you are erroring because you don't have one input. You need ...

7 mois il y a | 1

Réponse apportée
Why training stops showing error (out of memory) during implementing transfer learning with pre-trained network despite having a laptop of well configuration?
You have a very small GPU I'm afraid. You need to lower your |MiniBatchSize| until it works. Also, set your |ExecutionEnvironmen...

7 mois il y a | 1

| A accepté

Réponse apportée
Parallel Processing is better than buying another MATLAB licence?
There may be a misunderstanding here. Your typical license is to a user or a computer. That user, or that computer, can open as ...

7 mois il y a | 0

Réponse apportée
I can`t solve out this problem, there is always Output argument "varargout{2}" (and possibly others) not assigned a value in the execution with "dlarray/dlgradient" function.
Your mistake is |dlfeval(@dlgradient,...)|. You need to put your code that computes the loss and the loss gradients into a funct...

7 mois il y a | 0

| A accepté

Réponse apportée
AlexNet (filter groups) cannot be well resolved inside dlfeval (dimension mismatch error)
Sorry about this. This is because you have an old version of alexnet (although yes, it shouldn't error). For now, please get you...

7 mois il y a | 0

| A accepté

Réponse apportée
arrayfun vs loops again
I wish it were a cleverer answer, but I'm afraid that it's simply that MATLAB has been heavily optimized for |for| loops over th...

7 mois il y a | 3

Réponse apportée
Extreme memory usage when using gather
As others have worked out, it looks like the issue is the indexed assignment into u: u(TERRAIN:end,m) = abs(gather(head(ffield,...

8 mois il y a | 0

| A accepté

Réponse apportée
How can i fix the error mismatch format when convert multiplication layer from LayerGraph to dlnetwork in prune and quantize network example
For one solution, replace the fully connected layers with convolution layers with filters the size of the input and num filters ...

8 mois il y a | 0

Réponse apportée
How can i fix the error mismatch format when convert multiplication layer from LayerGraph to dlnetwork in prune and quantize network example
That's an annoying limitation which is hopefully fixed in current releases. Is there any particular reason why you can't use |mu...

8 mois il y a | 0

Réponse apportée
Arrayfun/gpuArray CUDA kernel need to be able to remember previous steps
This is a bit too vague to answer. Without indexing, how can each subproblem retrieve its subset of the data? If you just mean i...

8 mois il y a | 0

Réponse apportée
Loop through list of vectors (ie, the rows of a matrix), applying same "simple" function to each one, on GPU? Should I use arrayfun somehow?
If your calculation is truly sequential then by definition you cannot parallelize along the sequence. But it sounds like you def...

8 mois il y a | 0

Réponse apportée
Parallel Computing in C when using Matlab Coder (parpool and gpuArray)
GPU Coder will generate CUDA code for you. It can even automatically vectorize |for| loops. For a multithreaded parallel for loo...

10 mois il y a | 1

Réponse apportée
Can parfor run a series of GPU programs simultaneously？
It looks like you just have a bug in your CUDAKernel implementation, probably accessing unallocated memory. This is putting the ...

11 mois il y a | 0

Réponse apportée
error of GPU, net = trainNetwork(datastore, lgraph, options);
You are using your display GPU for computation and it does not have enough capacity. Try disabling all hardware acceleration for...

11 mois il y a | 1

| A accepté

Réponse apportée
How to train a sequence to classification network on GPU
This performance discrepancy is normal. Small sequence networks often cannot benefit from GPU parallelism, especially if they us...

11 mois il y a | 0

Réponse apportée
gpuArray large sparse arrays. Error codes: "CUSPARSE_INTERNAL_ERROR" / "UNKNOWN_ERROR"
Hi Joseph. It's hard to be definitive. There were some problems with cusparse and also Windows drivers when supporting the newes...

11 mois il y a | 0

Réponse apportée
NVIDIA A2 performance in Matlab R2023b is lousy
The A2's spec says its double precision performance is 140 GFLOPS vs the V100's 7 TFLOPS, so this is pretty much expected. Even ...

environ un an il y a | 3

| A accepté

Réponse apportée
Is there a utility like nvidia-smi within matlab to determine which gpus are in current use?
gpuDeviceTable is the utility for listing your devices and their properties. You can also see all your devices in the Parallel m...

environ un an il y a | 0

Réponse apportée
Optimizing distance calculation between vectors and pixels
I feel like I haven't fully understood what you're after here, but |pdist2| is the function you're supposed to use to compute di...

environ un an il y a | 0

Réponse apportée
The value of 'ValidationData' is invalid. Duplicate table variable name: 'input'. error during neural network training
augmentedImageDatastore returns a table so cannot be trivially combined. You should first transform it to convert it into a cell...

environ un an il y a | 0

| A accepté

Réponse apportée
How to apply a 2D matrix input to a trainNetwork?
Consult the documentation here. Typically sequence data is passed in as a cell array. In each cell you would be passing one seq...

environ un an il y a | 0

Réponse apportée
I would like to train a smallish network using cpu cores in parallel rather than gpu as they are slower.
setenv CUDA_VISIBLE_DEVICES -1 when you first start MATLAB, assuming you are running everything locally. However, as a general...

environ un an il y a | 0

Réponse apportée
Faster three dimensional higher order interpolation?
Thanks for the request, it will help us prioritise future work. In the meantime, it is possible to write your own interpolation ...

environ un an il y a | 0

Réponse apportée
How to solve "Unexpected error calling cuDNN: CUDNN_STATUS_EXECUTION_FAILED." error?
The Ada GPU architecture is not supported in R2018b. You need to upgrade MATLAB. You should have received a warning about this w...

plus d'un an il y a | 0

| A accepté

Réponse apportée
Will self-written exe application run on GPU on other PC?
Yes, if your other PC has a supported GPU your application will run on it. Isn't MATLAB great?!

plus d'un an il y a | 0

| A accepté

Réponse apportée
Error at linking stage using mexcuda
Relocatable device code needs to be linked by nvcc using -dlink before it can be linked to host code using the C linker, so you'...

plus d'un an il y a | 0

| A accepté

Réponse apportée
OCR returns slightly different results on different machines
This is expected for any highly optimized code like this. Even for two Intel machines, the core count will affect how operations...

plus d'un an il y a | 1

Réponse apportée
Will the MATLAB Answers community diminish/obsolete with the rise of AI-based chatbots?
You look like you are asking a question about how AI-assisted automation will change MATLAB Answers in the coming years and pote...

plus d'un an il y a | 3

Charger plus