Réponse apportée
How to use the PMLSM as a generator using a drive
Hello Joris, the main challenge in modelling a closed loop controller in Simulation (regardless of tool) is that at the end of ...

presque 5 ans il y a | 0

Réponse apportée
How do I replicate this model of Partial Discharge on Simulink
Hello, please use components from this list: https://www.mathworks.com/help/physmod/sps/breakers.html?searchHighlight=breaker&s...

presque 5 ans il y a | 0

Réponse apportée
DTC-SVM of an Induction motor
Please ask a question if you are going to post on the forums. See here: https://www.mathworks.com/matlabcentral/fileexchange/72...

presque 5 ans il y a | 0

Réponse apportée
Phase Voltage not changing with field voltage in a synchronous motor setup.
Hello Martin, I would guess there are 2 issues. 1: your load current is very load, so your machine isn't pulling any current. ...

presque 5 ans il y a | 0

Réponse apportée
Voltage map to SOC in Simcape/Electrical Battery block ?
Hello, this is very dependent on which battery model that you are using. Any good battery model will be very non-linear, and b...

environ 5 ans il y a | 0

| A accepté

Réponse apportée
HI,i am trying to communicate labview program with the thing speak cloud , i am facing a error code in labview
Hello Sangeetha, this is a forum for MathWorks products. Labview is a National Instrument's product. Please visit their help ...

environ 5 ans il y a | 0

Réponse apportée
Exponential and Polynomial/ZIP Single phase load in simulink
your absolute value will prevent it from every being truly sinusoidal. The model is outputting exactly the math that you have i...

environ 5 ans il y a | 0

Réponse apportée
Simulation hangs and crashes when changeing values of capacitors from 10e-6 to 10e-9
Hello Luis, the fact that it is crashing without a warning is a bug, can you share the model that crashes? On a side note, cha...

environ 5 ans il y a | 0

Réponse apportée
how do I change active variant mode continuous to discrete in power measurement block
Hello Pramod, double clicking the powergui block allows you to change the simulaiton type. https://www.mathworks.com/help/phys...

environ 5 ans il y a | 1

| A accepté

Réponse apportée
Trouble while generating a 3D custom component in Simscape Environment.
Hello Mihir, I wonder if your problem lies in how you are declaring/setting SOC, T, or Cycle. I copied your text to make a tes...

environ 5 ans il y a | 0

| A accepté

Réponse apportée
EV Hosting Capacity Assesment in Simscape Specialized Power System
Hello Haroon, First, I will address a good way to iterate your simulations. Use of the sim command which different simulaiton ...

environ 5 ans il y a | 0

| A accepté

Réponse apportée
How to extract cell arrays (dates) from a cell array
Hello Laura, please try this: temp = Therm1{:,1} Regards, Joel

environ 5 ans il y a | 0

Réponse apportée
help me to understand the following error in closed loop speed ctrl of BLDC motor
Hello, this type of error is unfortunately not very useful in debugging a model. It basically means that the solver couldn't h...

environ 5 ans il y a | 1

Réponse apportée
How to design three phase grid connected inverter in MATLAB Simulink?
Hello Akhtar, running open loop on a grid connected simulation would often not work since it won't by synchronized with the gri...

environ 5 ans il y a | 2

Réponse apportée
Simulation model of submodule (MMC)
Hello Geraud, please start with this example: https://www.mathworks.com/help/physmod/sps/ug/three-phase-modular-multilevel-conv...

environ 5 ans il y a | 0

| A accepté

Réponse apportée
DC bus current in motor drives
As this is a three phase machine being driving by an inverter, is not unexpected to see these currents on the dc/capacitor. The...

environ 5 ans il y a | 0

Réponse apportée
How can I supply reactive power using one of the models of grid-connected pv arrays in simulink?
Hello David, I realize this reply is too late to be useful, but hopefully others may find it useful. Many of these control ap...

environ 5 ans il y a | 0

Réponse apportée
Amper-hour capacity of Battery model from SimPowerSystems
No, this doesn't mean you won't get a different amount of energy out of the battery at different loads, it's just that the model...

environ 5 ans il y a | 0

Réponse apportée
unsolved "initialization commands cannot be evaluated" error when trying to run simulink
This appears to have been a bug in the library that has been resolved.

environ 5 ans il y a | 0

Réponse apportée
Why do I receive a data type mismatch error when using single phase asynchronos machine in simpower system?
This is an issue of having the wrong data types on your simulink signals. Try using this block: https://www.mathworks.com/help/...

environ 5 ans il y a | 0

Réponse apportée
What is the difference between "Load angle" and "rotor angle deviation" in Synchronous generator?
load angle refers to how much power is real/reactive where the rotor angle deviation is the mechanical rotation.

environ 5 ans il y a | 0

Réponse apportée
how to use surge arrester block of simpower system
Copying Ram's post into the answer section. Ram Patil on 14 Jan 2016 Please incorporate rated voltage of surge arrester as (Vr...

environ 5 ans il y a | 0

Réponse apportée
Mogeling a Delta/Y resistor ground 3 phase transformer in SimPowerSystems
You can do a Yn connection and add the resistor in manually.

environ 5 ans il y a | 0

Réponse apportée
How do I use the Simpowersystems Controlled Current Source with Phasor simulation?
This example does what you are looking to do: https://www.mathworks.com/matlabcentral/fileexchange/51137-one-year-simulation-in-...

environ 5 ans il y a | 0

Réponse apportée
SVC and PSS (Phasor Model) Example. Output voltages ?
It can be done but it requires post processing of the data. The model will not display it that way in any of its logging. Alte...

environ 5 ans il y a | 0

Réponse apportée
How to simulate harmonics generated by the electric power system load in simulink?
unfortunatley, this answer is too late for the asker, but it is a very common question so here is a response: The easiest way t...

environ 5 ans il y a | 0

Réponse apportée
Corrupted simulation of power_triphaseline SimPowerSystems example after change of the simulation's length
This model is particularly stiff and has some very small time constants. I couldn't get it to work long term until I set the si...

environ 5 ans il y a | 0

Réponse apportée
Simscape power system swiches Mosfet/IGBT
Hello Tony, I realize this answer is too late, but is this current flow happening because of the diode? Regards, Joel

environ 5 ans il y a | 0

| A accepté

Réponse apportée
How can I load initial states in Simpowersystems phasor simulation?
This type of issue typically means something is off with the plant model since the tool is not getting the correct results. Thi...

environ 5 ans il y a | 0

Réponse apportée
How we can collect training and testing data from attach model?
You can log the data as a standard simulink signal with a to workspace and set the sample time you want to record at: https://ww...

environ 5 ans il y a | 0