From the series: Student Teams Share Their Keys to Success
Maximilian Wick, Ecurie Aix
Christoph Hann, MathWorks
Maximilian Wick and Christoph Hahn introduce you to the concept of vehicle modeling with the IPG CarMaker and its interface to Simulink. Watch as they review the benefits of vehicle modeling and its potential to reduce testing time and increase car performance. In a software demo, a co-simulation between a 3D CFD simulation interfaced to the aerodynamics module of CarMaker using Simulink is shown. You'll be guided through the process of setting up a vehicle model, conducting the simulations, and post-processing the results for optimized race car setup.
MATLAB and Simulink Racing Lounge: Cruise Control in Efficiency Challenges Maximize efficiency by using an algorithm-based driving strategy with a vehicle model and GPS track data. Maximilian Amm, Alexander Hammerl, and Maximilian Mühlbauer designed a velocity controller for their EducEco / Shell Eco Marathon vehicle. Hammerl and Mühlbauer join Christoph Hahn, of MathWorks, to present their vehicle model and discuss their integration of a longitudinal velocity controller.
MATLAB and Simulink Racing Lounge: Lateral Vehicle Dynamics Simulation Improve your design parameters by modeling lateral vehicle dynamics using a two-mass car model in Simulink, and a Simscape model for sprung mass travel validation. Roni Deb, vehicle dynamics engineer from Camber Racing, demonstrates their models.
MATLAB and Simulink Racing Lounge: Steady-State Lap Time Simulation Use lap time simulation to make better design decisions. Paco Sevilla, of TUfast Formula Student team, and Christoph Hahn, of MathWorks, explain how lap time simulation can be used to compare vehicle concepts in the early design stage.
MATLAB and Simulink Racing Lounge: Using Simulation to Boost Race Car Development Learn how to develop an electric powertrain from scratch using Simscape for simulation. Alex Girard, from the Virginia Tech Formula SAE team introduces their approach to vehicle modeling. Together with Christoph Hahn, from MathWorks.
MATLAB and Simulink Racing Lounge: Developing a New Control Unit Using an FPGA Simplify your engine control unit by merging multiple devices and using an FPGA. After an introduction to FPGAs and the Xilinx Zynq 7000 platform, Sebastian Straßl and Alexander Ehard, from Starkstrom Augsburg, demonstrate HDL code generation.
MATLAB and Simulink Racing Lounge: Driver-in-the-Loop Simulations Håkan Richardson, of Chalmers Formula Student team, and Christoph Hahn, of MathWorks, discuss driver-in-the-loop simulations.
MATLAB and Simulink Racing Lounge: From Telemetry Data to Suspension Modeling Elias Schmidek of ElefantRacing, the Formula Student Team of the University Bayreuth, introduces you to working with suspension telemetry data to improve car performance.
MATLAB and Simulink Racing Lounge: Lap Time Simulation; Essential Part of Concept Development Philipp Föhn and Fabrice Oehler from AMZ Racing Team join Christoph Hahn from MathWorks to explain the fundamentals of Lap Time Simulation.
MATLAB and Simulink Racing Lounge: Reduce Testing Time by Vehicle Modeling Maximilian Wick and Christoph Hahn introduce you to the concept of vehicle modeling with the IPG CarMaker and its interface to Simulink.
MATLAB and Simulink Racing Lounge: Tire Modeling; Extracting Results from a Large Data Set Marc Russouw from Monash Motorsport and Christoph Hahn from MathWorks introduce you to the benefits tire modeling can have on your car set up.
MATLAB and Simulink Racing Lounge: Torque Vectoring - Controller Design, Tuning, and Testing Improve your racecar lap times with vehicle dynamic control modeling and torque vectoring development.
MATLAB and Simulink Racing Lounge: From Model to Racing in Five Minutes Formula Student Team Delft members, Tom and Daniel, join Christoph Hahn, of MathWorks, to demonstrate the speed and ease of the controller design process so that you can bring your control model to your racecar to improve drivability and performance
通过MATLAB/Simulink处理测试数据加速车辆控制算法仿真和设计 利用 MATLAB & Simulink，开发自动化与可视化数据分析工具，编写了简单的试车数据分析软件、实现了基于车辆路径的数据分析方法并实现了自动化的数据回放功能。同济大学电车队2015-2016赛季的队长马家骏将为我们介绍车队如何将MATLAB 和 Simulink 作为首要数据分析相关工具，解决试车中数据分析的重复工作，并将数据进行更直观的展现，从而帮助车队提高车辆测试阶段的效率。
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .Select web site
You can also select a web site from the following list:
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.