plot

Display RF propagation rays in Site Viewer

Syntax

plot(rays)

plot(rays,Name=Value)

Description

plot(rays) displays the specified propagation rays in Site Viewer.

plot(rays,Name=Value) displays the rays using additional options specified by name-value arguments.

Examples

Plot Propagation Rays Between Sites in Chicago

Perform ray tracing in Chicago and return the rays in comm.Ray objects. Then, display the rays without performing the ray tracing analysis again.

Launch Site Viewer with buildings in Chicago. For more information about the OpenStreetMap® file, see [1].

viewer = siteviewer(Buildings="chicago.osm");

Create a transmitter site on one building and a receiver site on another building. Show the line-of-sight path between the sites using the los function.

tx = txsite(Latitude=41.8800, ...
    Longitude=-87.6295, ...
    TransmitterFrequency=2.5e9);
rx = rxsite(Latitude=41.881352, ...
    Longitude=-87.629771, ...
    AntennaHeight=30);
los(tx,rx)

Create a ray tracing propagation model, which MATLAB® represents using a RayTracing object. By default, the model uses the SBR method and calculates propagation paths with up to two reflections.

pm = propagationModel("raytracing");

Perform the ray tracing analysis. The raytrace function returns a cell array containing the comm.Ray objects.

rays = raytrace(tx,rx,pm)

rays = 1×1 cell array
    {1×3 comm.Ray}

View the properties of the first ray object.

rays{1}(1)

ans = 
  Ray with properties:

      PathSpecification: 'Locations'
       CoordinateSystem: 'Geographic'
    TransmitterLocation: [3×1 double]
       ReceiverLocation: [3×1 double]
            LineOfSight: 0
           Interactions: [1×1 struct]
              Frequency: 2.5000e+09
         PathLossSource: 'Custom'
               PathLoss: 92.7686
             PhaseShift: 1.2945

   Read-only properties:
       PropagationDelay: 5.7088e-07
    PropagationDistance: 171.1462
       AngleOfDeparture: [2×1 double]
         AngleOfArrival: [2×1 double]
        NumInteractions: 1

Close Site Viewer.

close(viewer)

Create another Site Viewer with the same buildings, transmitter site, and receiver site. Then, display the propagation paths. Alternatively, you can plot individual paths by specifying a single ray object, for example rays{1}(2).

siteviewer(Buildings="chicago.osm");
show(tx)
show(rx)
plot(rays{1},Type="power", ...
    TransmitterSite=tx,ReceiverSite=rx)

Appendix

[1] The OpenStreetMap file is downloaded from https://www.openstreetmap.org, which provides access to crowd-sourced map data all over the world. The data is licensed under the Open Data Commons Open Database License (ODbL), https://opendatacommons.org/licenses/odbl/.

Input Arguments

rays — Propagation rays

comm.Ray object | vector of comm.Ray objects

Propagation rays, specified as a comm.Ray object or a vector of comm.Ray objects. The PathSpecification property of the ray must be "Locations".

Name-Value Arguments

Specify optional pairs of arguments as Name1=Value1,...,NameN=ValueN, where Name is the argument name and Value is the corresponding value. Name-value arguments must appear after other arguments, but the order of the pairs does not matter.

Example: plot(rays,Type="pathloss",ColorLimits=[-100 0]) adjusts the default color limits of the plotted ray.

Before R2021a, use commas to separate each name and value, and enclose Name in quotes.

Example: plot(rays,"Type","pathloss","ColorLimits",[-100 0]) adjusts the default color limits of the plotted ray.

Type — Type of quantity to plot

"pathloss" (default) | "power"

Type of quantity to plot, specified as one of these options:

• "pathloss" — The color of the path indicates the path loss in dB.

• "power" — The color of the path indicates the power of the signal in dBm.

Data Types: char | string

TransmitterSite — Transmitter site

txsite object

Transmitter site, specified as a txsite object.

Dependencies

This name-value argument applies only when Type is set to "power".

Data Types: char

ReceiverSite — Receiver site

rxsite object

Receiver site, specified as an rxsite object.

Dependencies

This name-value argument applies only when Type is set to "power".

Data Types: char

ColorLimits — Color limits for colormap

1-by-2 vector

Color limits for the colormap, specified as a 1-by-2 vector of the form [cmin cmax]. The value of cmin must be less than the value of cmax. cmin represents the lower saturation limit and cmax represents the upper saturation limit.

The default value is [-120 -5] when Type is "power" and [45 160] when Type is "pathloss".

Data Types: double

Colormap — Colormap applied to propagation path

'jet' (default) | predefined colormap | M-by-3 numeric array

Colormap applied to the propagation path, specified as a predefined colormap or an M-by-3 numeric array of RGB triplets, where M is the number of individual colors.

Data Types: double | char | string

ShowLegend — Show color legend on map

true (default) | false

Show the color legend on the map, specified as true or false.

Data Types: logical

Map — Map for visualization and surface data

siteviewer object

Map for visualization and surface data, specified as a siteviewer object.¹ By default, the function displays the rays in the current siteviewer object or a new siteviewer object if none are open.

Version History

Introduced in R2020a