Configuration de la radio

Définir les paramètres du hardware radio et ajuster les propriétés de la radio

Avant d’émettre et de recevoir des signaux radio avec une radio ADALM-PLUTO, vous devez appliquer des paramètres de hardware radio et ajuster les propriétés de la radio.

Fonctions

`configurePlutoRadio`	Configure ADALM-PLUTO radio firmware
`findPlutoRadio`	Report information about attached radios
`sdrdev`	Create radio object for specific radio hardware
`sdrrx`	Create receiver System object for radio hardware
`sdrtx`	Create transmitter System object for radio hardware
`designCustomFilter`	Design custom filter for Analog Devices AD936x RF chip
`info`	Obtain radio information

Classes

comm.SDRDevPluto Create object for Analog Devices ADALM-PLUTO radio

Rubriques

Baseband Sampling Rate and Filter Chains
Set the baseband sampling rate and filter chains for radio hardware.
DC Offset Tracking
Reduce DC bias on the in-phase and quadrature components of a signal.
Quadrature Tracking
Reduce I/Q imbalance on the in-phase and quadrature components of a signal.

Résolution des problèmes

Common Problems and Fixes

Resolve issues encountered while installing or using the features of the support package.