PZPlot Properties
PZPlot
properties control the appearance and behavior of
pole-zero plots created using pzplot
. By changing property values, you can modify certain aspects of the
plot.
pzp = pzplot(sys);
pzp.FrequencyUnit = "Hz";
For more information, see Customize Linear Analysis Plots at Command Line.
Response
Model responses, specified as a PZResponse
object or an array of such
objects. Use this property to modify the dynamic system model or appearance for each
response in the plot. Each PZResponse
object has these
properties.
Source data for the response, specified as a structure with these fields.
Dynamic system, specified as a SISO or MIMO dynamic system model or an array of dynamic system models.
When you initially create a plot, Model
matches the value you specify for sys
.
Response name, specified as a string or character vector and stored as a string.
Response visibility, specified as one of these logical on/off values:
"on"
,1
, ortrue
— Display the response in the plot."off"
,0
, orfalse
— Do not display the response in the plot.
The value is stored as an on/off logical value of type matlab.lang.OnOffSwitchState
.
Option to list the response in the legend, specified as one of these logical on/off values:
"on"
,1
, ortrue
— List the response in the legend."off"
,0
, orfalse
— Do not list the response in the legend.
The value is stored as an on/off logical value of type matlab.lang.OnOffSwitchState
.
Plot color, specified as an RGB triplet or a hexadecimal color code and stored as an RGB triplet.
Alternatively, you can specify some common colors by name. This table lists these colors and their corresponding RGB triplets and hexadecimal color codes.
Color Name | RGB Triplet | Hexadecimal Color Code |
---|---|---|
| [1 0 0] | #FF0000 |
| [0 1 0] | #00FF00 |
| [0 0 1] | #0000FF |
| [0 1 1] | #00FFFF |
| [1 0 1] | #FF00FF |
| [1 1 0] | #FFFF00 |
| [0 0 0] | #000000 |
| [1 1 1] | #FFFFFF |
Marker size, specified as a positive scalar.
Line width, specified as a positive scalar.
Response characteristics, specified as []
. Pole-zero plots have
no characteristics to display.
Units
Time units, specified as one of these values:
"nanoseconds"
"microseconds"
"milliseconds"
"seconds"
"minutes"
"hours"
"days"
"weeks"
"months"
"years"
Dependencies
By default, the response uses the time units of the plotted linear system. You can override the default units by specifying toolbox preferences. For more information, see Specify Toolbox Preferences for Linear Analysis Plots.
Frequency units, specified as one of these values:
"Hz"
"rad/s"
"rpm"
"kHz"
"MHz"
"GHz"
"rad/nanosecond"
"rad/microsecond"
"rad/millisecond"
"rad/minute"
"rad/hour"
"rad/day"
"rad/week"
"rad/month"
"rad/year"
"cycles/nanosecond"
"cycles/microsecond"
"cycles/millisecond"
"cycles/hour"
"cycles/day"
"cycles/week"
"cycles/month"
"cycles/year"
Dependencies
By default, the response uses the frequency units of the plotted linear system. You can override the default units by specifying toolbox preferences. For more information, see Specify Toolbox Preferences for Linear Analysis Plots.
Title and Axis Labels
Title text and style, specified as an AxesLabel
object with these
properties.
Text value, specified as a string or character vector and stored as a string.
To specify a title with multiple lines, concatenate the lines into a single string using newline
.
myplot.Title.String = "first line" + newline + "second line";
Font size in point units, specified as positive scalar. One point equals 1/72
inch.
Dependencies
The default font size depends on the toolbox preferences. For more information, see Specify Toolbox Preferences for Linear Analysis Plots.
Character thickness, specified as "bold"
or "normal"
.
Not all fonts have a bold weight. Therefore, the bold font might look the same as the normal font.
Dependencies
The default font weight depends on the toolbox preferences. For more information, see Specify Toolbox Preferences for Linear Analysis Plots.
Character slant, specified as "normal"
or "italic"
.
Not all fonts have an italic font styles. Therefore, the italic font might look the same as the normal font.
Dependencies
The default font angle depends on the toolbox preferences. For more information, see Specify Toolbox Preferences for Linear Analysis Plots.
Font name, specified as a string or character vector containing the name of a system-supported font name. The default font depends on the specific operating system and locale. To view a list of available system fonts, use listfonts
.
Text color, specified as an RGB triplet or a hexadecimal color code and stored as an RGB triplet.
Alternatively, you can specify some common colors by name. This table lists these colors and their corresponding RGB triplets and hexadecimal color codes.
Color Name | RGB Triplet | Hexadecimal Color Code |
---|---|---|
| [1 0 0] | #FF0000 |
| [0 1 0] | #00FF00 |
| [0 0 1] | #0000FF |
| [0 1 1] | #00FFFF |
| [1 0 1] | #FF00FF |
| [1 1 0] | #FFFF00 |
| [0 0 0] | #000000 |
| [1 1 1] | #FFFFFF |
Text interpreter, specified as one of these values:
"tex"
— Interpret characters using a subset of TeX markup."latex"
— Interpret characters using LaTeX markup."none"
— Display literal characters.
Subtitle text and style, specified as an AxesLabel
object with these
properties.
Text value, specified as a string or character vector and stored as a string.
To specify a subtitle with multiple lines, concatenate the lines into a
single string using newline
.
myplot.Subtitle.String = "first line" + newline + "second line";
Font size in point units, specified as positive scalar. One point equals 1/72
inch.
Dependencies
The default font size depends on the toolbox preferences. For more information, see Specify Toolbox Preferences for Linear Analysis Plots.
Character thickness, specified as "bold"
or "normal"
.
Not all fonts have a bold weight. Therefore, the bold font might look the same as the normal font.
Dependencies
The default font weight depends on the toolbox preferences. For more information, see Specify Toolbox Preferences for Linear Analysis Plots.
Character slant, specified as "normal"
or "italic"
.
Not all fonts have an italic font styles. Therefore, the italic font might look the same as the normal font.
Dependencies
The default font angle depends on the toolbox preferences. For more information, see Specify Toolbox Preferences for Linear Analysis Plots.
Font name, specified as a string or character vector containing the name of a system-supported font name. The default font depends on the specific operating system and locale. To view a list of available system fonts, use listfonts
.
Text color, specified as an RGB triplet or a hexadecimal color code and stored as an RGB triplet.
Alternatively, you can specify some common colors by name. This table lists these colors and their corresponding RGB triplets and hexadecimal color codes.
Color Name | RGB Triplet | Hexadecimal Color Code |
---|---|---|
| [1 0 0] | #FF0000 |
| [0 1 0] | #00FF00 |
| [0 0 1] | #0000FF |
| [0 1 1] | #00FFFF |
| [1 0 1] | #FF00FF |
| [1 1 0] | #FFFF00 |
| [0 0 0] | #000000 |
| [1 1 1] | #FFFFFF |
Text interpreter, specified as one of these values:
"tex"
— Interpret characters using a subset of TeX markup."latex"
— Interpret characters using LaTeX markup."none"
— Display literal characters.
X-axis label text and style, specified as an
AxesLabel
object with these properties.
Text value, specified as a string or character vector and stored as a string.
To specify a label with multiple lines, concatenate the lines into a
single string using newline
.
myplot.XLabel.String = "first line" + newline + "second line";
Font size in point units, specified as positive scalar. One point equals
1/72
inch.
Dependencies
The default font size depends on the toolbox preferences. For more information, see Specify Toolbox Preferences for Linear Analysis Plots.
Character thickness, specified as "bold"
or
"normal"
.
Not all fonts have a bold weight. Therefore, the bold font might look the same as the normal font.
Dependencies
The default font weight depends on the toolbox preferences. For more information, see Specify Toolbox Preferences for Linear Analysis Plots.
Character slant, specified as "normal"
or
"italic"
.
Not all fonts have an italic font styles. Therefore, the italic font might look the same as the normal font.
Dependencies
The default font angle depends on the toolbox preferences. For more information, see Specify Toolbox Preferences for Linear Analysis Plots.
Font name, specified as a string or character vector containing the name
of a system-supported font name. The default font depends on the specific
operating system and locale. To view a list of available system fonts, use
listfonts
.
Text color, specified as an RGB triplet or a hexadecimal color code and stored as an RGB triplet.
Alternatively, you can specify some common colors by name. This table lists these colors and their corresponding RGB triplets and hexadecimal color codes.
Color Name | RGB Triplet | Hexadecimal Color Code |
---|---|---|
| [1 0 0] | #FF0000 |
| [0 1 0] | #00FF00 |
| [0 0 1] | #0000FF |
| [0 1 1] | #00FFFF |
| [1 0 1] | #FF00FF |
| [1 1 0] | #FFFF00 |
| [0 0 0] | #000000 |
| [1 1 1] | #FFFFFF |
Text interpreter, specified as one of these values:
"tex"
— Interpret characters using a subset of TeX markup."latex"
— Interpret characters using LaTeX markup."none"
— Display literal characters.
Y-axis label text and style, specified as an
AxesLabel
object with these properties.
Text value, specified as a string or character vector and stored as a string.
To specify a label with multiple lines, concatenate the lines into a
single string using newline
.
myplot.YLabel.String = "first line" + newline + "second line";
Font size in point units, specified as positive scalar. One point equals
1/72
inch.
Dependencies
The default font size depends on the toolbox preferences. For more information, see Specify Toolbox Preferences for Linear Analysis Plots.
Character thickness, specified as "bold"
or
"normal"
.
Not all fonts have a bold weight. Therefore, the bold font might look the same as the normal font.
Dependencies
The default font weight depends on the toolbox preferences. For more information, see Specify Toolbox Preferences for Linear Analysis Plots.
Character slant, specified as "normal"
or
"italic"
.
Not all fonts have an italic font styles. Therefore, the italic font might look the same as the normal font.
Dependencies
The default font angle depends on the toolbox preferences. For more information, see Specify Toolbox Preferences for Linear Analysis Plots.
Font name, specified as a string or character vector containing the name
of a system-supported font name. The default font depends on the specific
operating system and locale. To view a list of available system fonts, use
listfonts
.
Text color, specified as an RGB triplet or a hexadecimal color code and stored as an RGB triplet.
Alternatively, you can specify some common colors by name. This table lists these colors and their corresponding RGB triplets and hexadecimal color codes.
Color Name | RGB Triplet | Hexadecimal Color Code |
---|---|---|
| [1 0 0] | #FF0000 |
| [0 1 0] | #00FF00 |
| [0 0 1] | #0000FF |
| [0 1 1] | #00FFFF |
| [1 0 1] | #FF00FF |
| [1 1 0] | #FFFF00 |
| [0 0 0] | #000000 |
| [1 1 1] | #FFFFFF |
Text interpreter, specified as one of these values:
"tex"
— Interpret characters using a subset of TeX markup."latex"
— Interpret characters using LaTeX markup."none"
— Display literal characters.
Axes Limits
X-axis limits, specified as a two-element vector of the form
[min,max]
, where min
is the minimum axis
limit and max
is the maximum axis limit.
Dependencies
When XLimitsMode
is "auto"
, the
X-axis limits are configured automatically based on the
system dynamics.
X-axis limit selection mode, specified as one of these strings.
"auto"
— Enable automatic limit selection, which is based on the total span of the plotted data."manual"
— Manually specify the axis limits by setting theXLimits
property.
Dependencies
If you modify XLimits
, the
XLimitsMode
value changes to
"manual"
.
Y-axis limits, specified as a two-element vector of the form
[min,max]
,where min
is the minimum axis
limit and max
is the maximum axis limit.
Dependencies
When YLimits
is "auto"
, the
Y-axis limits are configured automatically based on the
system dynamics.
Y-axis limit selection mode, specified as one of these values:
"auto"
— Enable automatic limit selection, which is based on the total span of the plotted data."manual"
— Manually specify the axis limits by setting theYLimits
property.
Dependencies
If you modify YLimits
, the
YLimitsMode
value changes to
"manual"
.
Axes Style
Axes style, specified as an AxesStyle
object with these properties.
Axes background color, specified as an RGB triplet or a hexadecimal color code and stored as an RGB triplet.
Alternatively, you can specify some common colors by name. This table lists these colors and their corresponding RGB triplets and hexadecimal color codes.
Color Name | RGB Triplet | Hexadecimal Color Code |
---|---|---|
| [1 0 0] | #FF0000 |
| [0 1 0] | #00FF00 |
| [0 0 1] | #0000FF |
| [0 1 1] | #00FFFF |
| [1 0 1] | #FF00FF |
| [1 1 0] | #FFFF00 |
| [0 0 0] | #000000 |
| [1 1 1] | #FFFFFF |
Option to display axes outline, specified as one of these logical on/off values.
"on"
,1
, ortrue
— Display outline."off"
,0
, orfalse
— Hide outline.
The value is stored as an on/off logical value of type matlab.lang.OnOffSwitchState
.
Line width of axes outline and tick marks, specified as a positive scalar value in point units.
Ruler color, specified as an RGB triplet or a hexadecimal color code and stored as an RGB triplet. The ruler color affects axes lines, tick marks, and tick labels.
Alternatively, you can specify some common colors by name. This table lists these colors and their corresponding RGB triplets and hexadecimal color codes.
Color Name | RGB Triplet | Hexadecimal Color Code |
---|---|---|
| [1 0 0] | #FF0000 |
| [0 1 0] | #00FF00 |
| [0 0 1] | #0000FF |
| [0 1 1] | #00FFFF |
| [1 0 1] | #FF00FF |
| [1 1 0] | #FFFF00 |
| [0 0 0] | #000000 |
| [1 1 1] | #FFFFFF |
Font size for tick labels in point units, specified as positive scalar. One point equals 1/72
inch.
Character thickness for tick labels, specified as "bold"
or "normal"
.
Not all fonts have a bold weight. Therefore, the bold font might look the same as the normal font.
Character slant for tick labels, specified as "normal"
or "italic"
.
Not all fonts have an italic font styles. Therefore, the italic font might look the same as the normal font.
Font name for tick labels, specified as a string or character vector containing the name of a system-supported font name. The default font depends on the specific operating system and locale. To view a list of available system fonts, use listfonts
.
Option to display grid, specified as one of these logical on/off values.
"on"
,1
, ortrue
— Display grid."off"
,0
, orfalse
— Hide grid.
The value is stored as an on/off logical value of type matlab.lang.OnOffSwitchState
.
Dependencies
The default grid visibility depends on the toolbox preferences. For more information, see Specify Toolbox Preferences for Linear Analysis Plots.
Custom grid type, specified as one of these values:
"default"
— Select the grid type based on the time-domain of the responses being plotted.All responses are for continuous-time systems, use an s-plane grid.
All responses are for discrete-time systems, use a z-plane grid.
For a mix of continuous-time and discrete-time responses or when there are no responses, use a Cartesian grid.
"s-plane"
— Use an s-plane grid."z-plane"
— Use a z-plane grid.
Grid color, specified as an RGB triplet or a hexadecimal color code and stored as an RGB triplet.
Alternatively, you can specify some common colors by name. This table lists these colors and their corresponding RGB triplets and hexadecimal color codes.
Color Name | RGB Triplet | Hexadecimal Color Code |
---|---|---|
| [1 0 0] | #FF0000 |
| [0 1 0] | #00FF00 |
| [0 0 1] | #0000FF |
| [0 1 1] | #00FFFF |
| [1 0 1] | #FF00FF |
| [1 1 0] | #FFFF00 |
| [0 0 0] | #000000 |
| [1 1 1] | #FFFFFF |
Grid line width, specified as a positive scalar in point units.
Grid line style, specified as one of these values.
Line Style | Description |
---|---|
"-" | Solid line |
"--" | Dashed line |
":" | Dotted line |
"-." | Dash-dotted line |
Grid line transparency, specified as a scalar value in the range [0,1], where a smaller value indicates more transparency.
Dependencies
This property is supported for pole-zero plots with a default grid type and a mix of continuous-time and discrete-time responses.
Natural frequencies for plotting s-plane and z-plane grid lines, specified as a vector of positive values.
If you do not specify natural frequencies:
s-plane grid lines use values based on the axes limits.
z-plane grid lines use values from 0 to π/Ts in steps of 0.1*π/Ts, where Ts is the sample time specified using
GridSampleTime
.
the chart
Dependencies
This property is supported for pole-zero plots with a nondefault grid type or with all responses in the same time domain.
Damping ratios for plotting s-plane and z-plane grid lines, specified as a vector of values greater than 0 and less than 1.
If you do not specify damping ratios:
s-plane grid lines use values based on the axes limits.
z-plane grid lines use values from 0 to 1 in increments of 0.1.
Dependencies
This property is supported for pole-zero plots with a nondefault grid type or with all responses in the same time domain.
Sample time (Ts) of
z-plane grid, specified as -1
or a
positive scalar. The natural-frequency grid lines depend on the value of
Ts.
When GridSampleTime
is a positive scalar, then the
natural-frequency grid line labels display the actual frequency
values.
When GridSampleTime
is -1
:
If all responses have the same sample time, then the grid sample time matches that sample time and the natural-frequency grid line labels display the actual frequency values.
If the sample times of the responses differ or are all
-1
, then the grid line labels display normalized factors of wn/Ts.
Dependencies
This property is supported for pole-zero plots with a nondefault grid type or with all responses in the same time domain.
Option to display grid labels, specified as one of these logical on/off values.
"on"
,1
, ortrue
— Display grid labels."off"
,0
, orfalse
— Hide grid labels.
The value is stored as an on/off logical value of type matlab.lang.OnOffSwitchState
.
Option to display minor grid lines in plots of MIMO systems, specified as one of these logical on/off values.
"on"
,1
, ortrue
— Display minor grid lines."off"
,0
, orfalse
— Hide minor grid lines.
The value is stored as an on/off logical value of type matlab.lang.OnOffSwitchState
.
Dependencies
This property is supported for pole-zero plots with a default grid type and a mix of continuous-time and discrete-time responses.
Minor grid lines are not displayed by default.
Minor grid color, specified as an RGB triplet or a hexadecimal color code and stored as an RGB triplet.
Alternatively, you can specify some common colors by name. This table lists these colors and their corresponding RGB triplets and hexadecimal color codes.
Color Name | RGB Triplet | Hexadecimal Color Code |
---|---|---|
| [1 0 0] | #FF0000 |
| [0 1 0] | #00FF00 |
| [0 0 1] | #0000FF |
| [0 1 1] | #00FFFF |
| [1 0 1] | #FF00FF |
| [1 1 0] | #FFFF00 |
| [0 0 0] | #000000 |
| [1 1 1] | #FFFFFF |
Dependencies
This property is supported for pole-zero plots with a default grid type and a mix of continuous-time and discrete-time responses.
Width of minor grid lines, specified as a positive scalar in point units.
Dependencies
This property is supported for pole-zero plots with a default grid type and a mix of continuous-time and discrete-time responses.
Minor grid line style, specified as one of these values.
Line Style | Description |
---|---|
"-" | Solid line |
"--" | Dashed line |
":" | Dotted line |
"-." | Dash-dotted line |
Dependencies
This property is supported for pole-zero plots with a default grid type and a mix of continuous-time and discrete-time responses.
Minor grid line transparency, specified as a scalar value in the range [0,1], where a smaller value indicates more transparency.
Dependencies
This property is supported for pole-zero plots with a default grid type and a mix of continuous-time and discrete-time responses.
Since R2025a
Active data axes for hold
workflows on MIMO linear analysis plots
or a SISO Bode plots, specified as a two-element vector of integers indicating the row
and column of the active axes. When you first create a chart, the bottom right axes is
active. If you reduce the number of visible axes, the active axes automatically updates
to a visible axes if necessary.
The DataAxes
property affects only hold
workflows that do not include adding new responses.
Legend
Legend axes selection mode, specified as one of these values:
"auto"
— Show the legend in the northeast visible axes."manual"
— Show the legend in the axes indicated by theLegendAxes
property.
Legend axes, specified as a two-element vector of integers indicating the row and column of the axes in which to display the legend.
Dependencies
When LegendAxesMode
is "auto"
, LegendAxes
contains the row and column of the northeast visible axis.
Option to display the legend, specified as one of these logical on/off values:
"on"
,1
, ortrue
— Display the legend."off"
,0
, orfalse
— Hide the legend.
The value is stored as an on/off logical value of type matlab.lang.OnOffSwitchState
.
Legend location within the axes, specified as one of these values:
"northeast"
— Top-right corner"northwest"
— Top-left corner"southeast"
— Bottom-left corner"southwest"
— Bottom-right corner"north"
— Top"south"
— Bottom"east"
— Right side"west"
— Left side"best"
— Location where the least conflict occurs with the plot data at the time that you create the legend. If the plot data changes, you might need to reset the location to"best"
.
Orientation for stacking legend items, specified as one of these values:
"vertical"
— Stack items vertically."horizontal"
— Stack items horizontally.
Chart Layout
Parent container of the chart, specified as one of these objects:
Figure
TiledChartLayout
UIFigure
UIGridLayout
UIPanel
UITab
Chart visibility, specified as one of these logical on/off values:
"on"
,1
, ortrue
— Display the chart."off"
,0
, orfalse
— Hide the chart without deleting it. You can still access the properties of chart when it is not visible.
The value is stored as an on/off logical value of type matlab.lang.OnOffSwitchState
.
Visibility of the chart object handle in the list of children for its parent, specified as one of these values:
'on'
— Chart object handle is always visible.'off'
— Chart object handle is invisible at all times. This option is useful for preventing unintended changes to the chart by another function. To temporarily hide the handle during the execution of that function, set theHandleVisibility
to'off'
.'callback'
— Chart object handle is visible from within callbacks or functions invoked by callbacks, but not from within functions invoked from the command line. This option blocks access to the object in the Command Window, but it allows callback functions to access it.
Position units, specified as a value from the following table. To change the position of the chart in specific units, set the Units
property before specifying the Position
property. If you specify the Units
and Position
properties in a single command (using name-value pairs), be sure to specify Units
before Position
.
Units | Description |
---|---|
'normalized' | Normalized with respect to the parent container, which is typically the figure, panel, or tab. The lower left corner of the container maps to (0,0) , and the upper right corner maps to (1,1) . |
'inches' | Inches |
'centimeters' | Centimeters |
'characters' | Based on the default font of the graphics root object:
|
'points' | Typography points. One point equals 1/72 inch. |
'pixels' | On Windows® and Macintosh systems, the size of a pixel is 1/96th of an inch. This size is independent of your system resolution. On Linux® systems, the size of a pixel is determined by your system resolution. |
Chart size and location, including the margins for decorations such as axis labels and tick marks. Specify this property as a vector of form [left bottom width height]
. The values are in the units specified by the Units
property.
left
— Distance from the left edge of the parent container to the outer-left edge of the chart that includes the margins. Typically, the parent container is a figure, panel, or tab.bottom
— Distance from the bottom edge of the parent container to the outer-bottom edge of the chart that includes the margins.width
— Width of chart, including the margins.height
— Height of chart, including the margins.
Note
Setting this property has no effect when the parent of the chart is a TiledChartLayout
.
Chart size and location, excluding the margins for decorations such as axis labels and tick marks. Specify this property as a vector of form [left bottom width height]
. The values are in the units specified by the Units
property.
left
— Distance from the left edge of the parent container to the inner-left edge of the chart that excludes the margins. Typically, the parent container is a figure, panel, or tab.bottom
— Distance from the bottom edge of the parent container to the inner-bottom edge of the chart that excludes the margins.width
— Width of the chart, excluding the margins.height
— Height of the chart, excluding the margins.
Note
Setting this property has no effect when the parent of the chart is a TiledChartLayout
.
Chart size and location, excluding the margins for decorations such as axis labels and tick marks. Specify this property as a vector of form [left bottom width height]
. This property is equivalent to the InnerPosition
property.
Note
Setting this property has no effect when the parent of the chart is a TiledChartLayout
.
Position property to hold constant when adding, removing, or changing decorations, specified as one of these values:
'outerposition'
— TheOuterPosition
property remains constant when you add, remove, or change decorations such as a title or an axis label. If any positional adjustments are needed, MATLAB® adjusts theInnerPosition
property.'innerposition'
— TheInnerPosition
property remains constant when you add, remove, or change decorations such as a title or an axis label. If any positional adjustments are needed, MATLAB adjusts theOuterPosition
property.
Note
Setting this property has no effect when the parent of the chart is a TiledChartLayout
.
Layout options, specified as a TiledChartLayoutOptions
object or GridLayoutOptions
object. This property specifies options when an instance of your chart is a child of a tiled chart layout or gridded layout. If the instance is not a child of one of these layouts (for example, it is a child of a figure or panel), then this property is empty and has no effect. Otherwise, you can position the chart within the layout by configuring the layout options.
This code places chart object c
into the third tile of a tiled chart layout and makes the chart span 2 rows and 3 columns.
c.Layout.Tile = 3; c.Layout.TileSpan = [2 3];
This code places chart object c
into row 2
of a gridded layout and makes the chart span columns 3
and 4
.
c.Layout.Row = 2; c.Layout.Column = [3 4];
Properties to reset when adding a new plot to the chart, specified as one of these values:
'add'
— Add new plots to the existing chart. Do not delete existing plots or reset axes properties before displaying the new plot.'replace'
— Delete existing plots and reset chart properties, exceptPosition
andUnits
, to their default values before displaying the new plot.
Version History
Introduced in R2024bWhen using hold-on workflows, you can now programmatically specify the active data axes
for a chart. To specify the active data axes, set the DataAxes
property
of the corresponding chart object.
You can now specify these style properties for chart objects:
Background color — Use the
AxesStyle.BackgroundColor
property.Box outline width — Use the
AxesStyle.BoxLineWidth
property.
You can now control the visibility of the grid labels for PZ plots using the
AxesStyle.GridLabelsVisible
property. For example, display the grid for
a plot and hide the grid labels.
pzp = pzplot(sys); pzp.AxesStyle.GridVisible = "on"; pzp.AxesStyle.GridLabelsVisible = "off";
You can now customize grid line appearance for using new style properties. To specify a
style property, set the corresponding AxesStyle
subproperty of the
chart object. This table lists the new style properties and their subproperties and
supported plots.
Style Property | AxesStyle Subproperty | Supported Pole-Zero Plots |
---|---|---|
Major grid line style | GridLineStyle | All |
Major grid transparency | GridAlpha | Plots with a default grid type and a mix of continuous-time and discrete-time responses |
Minor grid visibility | MinorGridVisible | |
Minor grid color | MinorGridColor | |
Minor grid line width | MinorGridLineWidth | |
Minor grid line style | MinorGridLineStyle | |
Minor grid transparency | MinorGridAlpha | |
Custom grid type | GridType | All plots |
Custom grid damping ratios | GridDampingSpec | Plots with a nondefault grid type or with all responses in the same time domain |
Custom grid natural frequencies | GridFrequencySpec | |
Custom grid sample time | GridSampleTime |
MATLAB Command
You clicked a link that corresponds to this MATLAB command:
Run the command by entering it in the MATLAB Command Window. Web browsers do not support MATLAB commands.
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: United States.
You can also select a web site from the following list
How to Get Best Site Performance
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Americas
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)