Configuration du modèle
Configuration du modèle de réglage automatisé dans Control System Tuner
Control System Tuner vous permet de régler n’importe quelle architecture de contrôle modélisée dans MATLAB® par des modèles LTI ou un modèle de représentation d’état généralisé. Si vous disposez du software Simulink® Control Design™, vous pouvez modéliser votre architecture de contrôle dans Simulink et la régler dans Control System Tuner. Pour démarrer, voir Specify Control Architecture in Control System Tuner.
Applications
Control System Tuner | Tune fixed-structure control systems |
Rubriques
Configuration de réglage des modèles Simulink
- Open Control System Tuner for Tuning Simulink Model
Access Control System Tuner app from the Simulink Editor. - Specify Operating Points for Tuning in Control System Tuner
Specify the operating conditions at which Control System Tuner computes system responses and tunes controller parameters for a Simulink model. - Specify Blocks to Tune in Control System Tuner
Specify which blocks in your Simulink are the controller elements that you want to tune. - View and Change Block Parameterization in Control System Tuner
View and edit the parameterization that Control System Tuner applies to each block that you designate for tuning. - How Tuned Simulink Blocks Are Parameterized
Both Control System Tuner and theslTuner
interface automatically assign predefined parameterizations to certain Simulink blocks.
Configuration de réglage des modèles MATLAB
- Specify Control Architecture in Control System Tuner
Control architecture comprises the control elements of your system, filter and sensor components, the plant under control, and the interconnections among all these elements. - Setup for Tuning Control System Modeled in MATLAB
To model your control architecture in MATLAB for Control System Tuner, construct a tunable model of the control system that identifies and parameterizes its tunable elements. - View and Change Block Parameterization in Control System Tuner
View and edit the parameterization that Control System Tuner applies to each block that you designate for tuning.
Points d’analyse
- Mark Signals of Interest for Control System Analysis and Design
Analysis points allow you to access to internal signals, perform open-loop analysis, or specify requirements for controller tuning in systems modeled in either MATLAB or Simulink.