With the MATLAB® Coder™ Support Package for NVIDIA® Jetson® and NVIDIA DRIVE™ Platforms, you can automate the deployment of Simulink® models on embedded NVIDIA boards by building and deploying the generated code on the target hardware board. You can also remotely communicate with the target and control the peripheral devices for prototyping.
For an example of deployment to NVIDIA targets, see Deploy and Classify Webcam Images on NVIDIA Jetson TX2 Platform from Simulink (MATLAB Coder Support Package for NVIDIA Jetson and NVIDIA DRIVE Platforms).
Starting in R2021a, the GPU Coder™ Support Package for NVIDIA GPUs is named MATLAB Coder Support Package for NVIDIA Jetson and NVIDIA DRIVE Platforms. To use this support package in R2021a, you must have the MATLAB Coder product.
The model configuration parameters provide many options for the code generation and build process.
Open the Configuration Parameters dialog box. Select the Hardware
Implementation pane. Set the Hardware board to
NVIDIA Jetson. You can also use
Under Target hardware resources group, set the Device Address, Username, and Password of your target hardware. The device address is the IP address or host name of the target platform.
Click OK to save and close the Configuration Parameters dialog box.
You can also use
set_param to configure the model parameter
programmatically in the MATLAB Command
Once the hardware parameters are set, in the Simulink Editor, open the Hardware tab.
Select Build, Deploy & Start to generate and deploy the code on the hardware.