soc.RFDataConverter

Configure the RF Data Converter on the RFSoC device from MATLAB

Since R2020b

Description

The soc.RFDataConverter object configures the RF data converter on the RFSoC device from MATLAB^®. This object creates an Ethernet connection to the RFSoC device, allowing control of the ADC and DAC tiles from MATLAB.

Creation

Syntax

rfDataConverter = soc.RFDataConverter(deviceName,deviceAddress)

Description

rfDataConverter = soc.RFDataConverter(deviceName,deviceAddress) creates an soc.RFDataConverter object with the Name property set to the deviceName argument.

Input Arguments

deviceName — Name of RFSoC device

character vector | scalar string

Name of the RFSoC device on the connected hardware.

Data Types: char | string

deviceAddress — Remote IP address of RFSoC

string of IPV4 address

IP address of RFSoC device on the local network.

Data Types: char | string

Example: 127.0.0.1

Output Arguments

rfDataConverter — RF data converter

soc.RFDataConverter object

RF data converter, specified as an soc.RFDataConverter object. Via Ethernet, this object connects the host computer to the RF data converter on the connected SoC device. Use the object functions and properties of this object to configure the RF data converter.

Properties

Name — Name of RFSoC device

Read-only: character vector (default) | string scalar

This property is read-only.

Name of the RFSoC device on the connected hardware, returned as a character vector or string scalar.

ADCChannelsPerTile — Number of channels in ADC tile

Read-only: positive integer

This property is read-only.

Number of channels in a ADC tile of the device, returned as a positive integer.

TotalADCTiles — Total number of ADC tiles available on device

Read-only: positive integer

This property is read-only.

Total number of ADC tiles available on the device, returned as a positive integer.

DACChannelsPerTile — Number of channels in DAC tile

Read-only: positive integer

This property is read-only.

Number of channels in a DAC tile of the device, returned as a positive integer.

TotalDACTiles — Total number of DAC tiles available on device

Read-only: positive integer

This property is read-only.

Total number of DAC tiles available on the device, returned as a positive integer.

LMKClkSelect — LMK clock type

'Default' (default) | 'SYSREF'

LMK clock type, specified as 'Default' or 'SYSREF'.

Data Types: char | string

FPGASamplesPerClock — Samples per clock cycle of DAC

4 (default) | positive integer

Number of samples per clock cycle of the DAC, specified as a positive integer.

Example: 8

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

ConverterClockRatio — Ratio of tile output clock to stream clock

1 (default) | positive scalar

Ratio of the tile output clock to the stream clock, specified as a positive scalar.

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

MTSConfigure — Multi-tile synchronization mode

false (default) | true

Multi-tile synchronization mode, specified as false or true. A value of true enables multi-tile synchronization.

Example: false

Data Types: logical

Object Functions

General

setup	Establish connection with RF data converter
applyConfiguration	Apply settings to the RF Data Converter
release	Release TCP/IP connection

Configure System Properties

enableMTS	Enable multi-tile synchronization mode
disableMTS	Disable multi-tile synchronization mode
configureLMXPLL	Set reference clock frequency of external LMX PLL
getLMXPLL	Reference clock frequency of external LMX PLL
readRFStatus	Status of RF-ADC and RF-DAC tiles
applyNyquistZone	Update Nyquist zone
applyCalibrationMode	Update calibration mode for RF-ADC

Configure RF-ADC Properties

configureADCTile	Configure the PLL and sampling rate of ADC tile
configureADCChannel	Configure decimation factor in channel of ADC tile
configureADCTileClock	Configure output clock frequency of ADC tile
configureADCMixer	Configure properties of mixer for channel in ADC tile
configureADCLocalOscillator	Configure frequency of NCO mixer for ADC channel in RF-ADC tile
configureADCThresholdSettings	Configure threshold settings for ADCs in real time

Configure RF-DAC Properties

configureDACTile	Configure the PLL and sampling rate of DAC tile
configureDACChannel	Configure interpolation factor in channel of DAC tile
configureDACTileClock	Configure output clock frequency of DAC tile
configureDACMixer	Configure properties of mixer for channel in DAC tile
configureDACLocalOscillator	Configure frequency of NCO mixer for DAC channel in RF-DAC tile

Version History

Introduced in R2020b