Stop or Restart a Model Running on Raspberry Pi Hardware
Caution
Do not use the RESET button to stop a running model and reboot the board. Doing so can corrupt operating system and program files. To repair corrupt files, replace the firmware using Hardware Setup.
To stop a model running on the board, in the MATLAB® Command Window, enter:
h=raspberrypi; h.stopModel('modelName');
sumdiff
model, enter:
mypi=raspberrypi; mypi.stopModel('sumdiff');
To restart a model that was previously running on the board or run multiple instances of a model, in the MATLAB Command Window, enter:
h=raspberrypi; h.runModel('modelName');
Note
You do not need to enter h=raspberrypi;
multiple times if a
previous instance of h
is available in the MATLAB Workspace.
For example, to restart the sumdiff
model you stopped in the
previous example, enter:
h.runModel('sumdiff');