Create and contain an Observer model
An Observer Reference block, which you add to the top level of your main Simulink® model, references a separate model called the Observer model. The Observer model and Observer Reference block enable wireless monitoring of the signals in the main model. The Observer model can contain blocks such as scopes or a verification subsystem to monitor or verify the observed signals, respectively. For an example of using Observers, see Access Model Data Wirelessly by Using Observers.
The Observer Reference block does not have inports or outports. Signals are mapped to the Observer Model through the Observer Port block.
Observer Model name— File name of Observer model
''(default) | character vector
Path to the Observer model. The file name must be a valid MATLAB® identifier. The extension, for example,
optional. You enter the Observer model name in the Observer Reference block parameters
dialog box, which you access by right-clicking on the block and selecting
Block Parameters. You can also open the model you specify from
the dialog box.
|Type: character vector|