how to generate pulses with 180 deg phase shift
11 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
SRUTHI SURENDRAN
le 13 Juin 2014
Commenté : Armando Marchena
le 24 Nov 2015
i require 4 pulses for full bridge inverter. In one leg with out phase delay and on other leg with phse delay if 180 deg. here fs=60khz so ts=1/60000 dead time =0.5e-6 first leg phase shift= 0 here i generate two signals using pulse generator.now i require two pulses for 2nd leg with phase shift of 180 deg
0 commentaires
Réponse acceptée
Dishant Arora
le 13 Juin 2014
Modifié(e) : Dishant Arora
le 13 Juin 2014
A phase shift is equivalent to multiplication by a complex exponential in frequency domain. Take an fft of the whole signal and multiply each component (as a complex number) by the complex number cos(p) + i * sin(p) where p is the phase-shift given in radians. Afterwards take the inverse transform and you are done.
1 commentaire
Armando Marchena
le 24 Nov 2015
Hi there Dishant Arora, I am thrying to do the same phase shift PWM. By multiplying each component, do you mean I have to take the FFT the split that into Re and Im, then multiply each by the fucntion cos(p) + i * sin(p) ?
Plus de réponses (0)
Voir également
Catégories
En savoir plus sur Fourier Analysis and Filtering dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!