Why do I get the error "Invalid or deleted object" for this code
21 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Tobenna Uzuegbunam
le 8 Oct 2021
Commenté : Tobenna Uzuegbunam
le 10 Oct 2021
I have the code below which I have run before without problems but I suddenly get the error message "Error using stackedplot (line 100)
Invalid or deleted object." at the line "stackedplot(acctable,{'accX','accY','accZ'})". Can anyone help with this?
file = ('F:\MATLAB\Vessel_data\Galloper\Seacat Liberty\improveddata2019-09-30');
load (file)
%Create table of two columns time and acceleration
if isfield(data,'COM23_heading')== 1
full_trip = table(data.timeStamp,data.accX,data.accY,data.accZ,data.roll,data.pitch,data.yaw,data.COM23_speed,data.COM23_heading,data.COM23_lat,data.COM23_lon,data.dist2harbour,data.dist2turbine,data.inField,'VariableNames',{'timeStamp','accX[G]','accY[G]','accZ[G]','roll[deg]','pitch[deg]','yaw[deg]','speed[kph]','heading[deg]','lat','lon','dist2harbour','dist2turbine','inField'});
else
full_trip = table(data.timeStamp,data.accX,data.accY,data.accZ,data.roll,data.pitch,data.yaw,data.COM7_speed,data.COM7_heading,data.COM7_lat,data.COM7_lon,data.dist2harbour,data.dist2turbine,data.inField,'VariableNames',{'timeStamp','accX[G]','accY[G]','accZ[G]','roll[deg]','pitch[deg]','yaw[deg]','speed[kph]','heading[deg]','lat','lon','dist2harbour','dist2turbine','inField'});
end
%Convert timestamp to datenum format
full_trip.date = datetime(full_trip.timeStamp,'ConvertFrom',"datenum");
%Create time/durtion in second by converting datetime to seconds
durtime = datetime(full_trip.date, 'InputFormat', 'yyyy-MM-dd HH:mm:ss.SS', 'Format', 'yyyy-MM-dd HH:mm:ss.SS');
durtime(isnat(durtime)) = datetime(full_trip.date(isnat(durtime)), 'InputFormat', 'yyyy-MM-dd HH:mm:ss');
full_trip.date = durtime;
full_trip.duration = seconds(full_trip.date - full_trip.date(1));
%convert acc in G to m/s^2
full_trip.accX = convacc(full_trip.("accX[G]"),'G''s','m/s^2');
full_trip.accY = convacc(full_trip.("accY[G]"),'G''s','m/s^2');
full_trip.accZ = convacc(full_trip.("accZ[G]"),'G''s','m/s^2');
%Rearrange and remove timestamp variable
full_trip = movevars(full_trip, {'date','duration','accX','accY','accZ'}, 'Before', "accX[G]");
%Create a categorial value of in windfarm
full_trip.location = categorical(full_trip.inField);
full_trip.location = renamecats(full_trip.location,"false","Transit");
full_trip.location = renamecats(full_trip.location,"true","Windfarm");
Visualize data
acctable = table(full_trip.duration,full_trip.date,full_trip.accX,full_trip.accY,full_trip.accZ,'VariableNames',{'duration','date','accX','accY','accZ'});
acctimetable = table2timetable(acctable);
windowlength = 1800;
stdaccY = retime(acctimetable,"regular",@std,"TimeStep",seconds(windowlength));
figure(1)
subplot(3,2,[1,2])
geoplot(full_trip.lat,full_trip.lon)
subplot(3,2,3)
stackedplot(acctable,{'accX','accY','accZ'})
subplot(3,2,4)
plot(stdaccY.date(1:end-1),stdaccY{1:end-1,["accX","accY","accZ"]},'o-')
ylabel("Std value from sensor")
legend(["X","Y","Z"],"Location","northeast")
title(compose("Vessel Acceleration: ""std"" method, %.1f seconds per window",windowlength))
subplot(3,2,5)
stackedplot(full_trip,{'roll[deg]','pitch[deg]'})
subplot(3,2,6)
gscatter(full_trip.date,full_trip.(13),full_trip.location)
0 commentaires
Réponse acceptée
Walter Roberson
le 8 Oct 2021
Modifié(e) : Walter Roberson
le 8 Oct 2021
That error tends to occur if an axes gets deleted out from underneath you. subplot() can cause existing axes to be deleted, in the circumstance that the new axes overlaps an existing subplot without being exactly the same size.
When I look at your subplot() calls, everything looks okay to me: the only way at the moment that I could see the problem happening is if you happened to click on something while drawing was happening... in which case the "current" axes could change without notice.
You can reduce the possibilities of that happening by always expliciitly specifying the parent of graphics calls.
I do have a concern in the below: geoplot() needs a geoaxes, and I am not certain that it will play nicely with the subplot()
file = ('F:\MATLAB\Vessel_data\Galloper\Seacat Liberty\improveddata2019-09-30');
load (file)
%Create table of two columns time and acceleration
if isfield(data,'COM23_heading')== 1
full_trip = table(data.timeStamp,data.accX,data.accY,data.accZ,data.roll,data.pitch,data.yaw,data.COM23_speed,data.COM23_heading,data.COM23_lat,data.COM23_lon,data.dist2harbour,data.dist2turbine,data.inField,'VariableNames',{'timeStamp','accX[G]','accY[G]','accZ[G]','roll[deg]','pitch[deg]','yaw[deg]','speed[kph]','heading[deg]','lat','lon','dist2harbour','dist2turbine','inField'});
else
full_trip = table(data.timeStamp,data.accX,data.accY,data.accZ,data.roll,data.pitch,data.yaw,data.COM7_speed,data.COM7_heading,data.COM7_lat,data.COM7_lon,data.dist2harbour,data.dist2turbine,data.inField,'VariableNames',{'timeStamp','accX[G]','accY[G]','accZ[G]','roll[deg]','pitch[deg]','yaw[deg]','speed[kph]','heading[deg]','lat','lon','dist2harbour','dist2turbine','inField'});
end
%Convert timestamp to datenum format
full_trip.date = datetime(full_trip.timeStamp,'ConvertFrom',"datenum");
%Create time/durtion in second by converting datetime to seconds
durtime = datetime(full_trip.date, 'InputFormat', 'yyyy-MM-dd HH:mm:ss.SS', 'Format', 'yyyy-MM-dd HH:mm:ss.SS');
durtime(isnat(durtime)) = datetime(full_trip.date(isnat(durtime)), 'InputFormat', 'yyyy-MM-dd HH:mm:ss');
full_trip.date = durtime;
full_trip.duration = seconds(full_trip.date - full_trip.date(1));
%convert acc in G to m/s^2
full_trip.accX = convacc(full_trip.("accX[G]"), 'G''s', 'm/s^2');
full_trip.accY = convacc(full_trip.("accY[G]"), 'G''s', 'm/s^2');
full_trip.accZ = convacc(full_trip.("accZ[G]"), 'G''s', 'm/s^2');
%Rearrange and remove timestamp variable
full_trip = movevars(full_trip, {'date','duration','accX','accY','accZ'}, 'Before', "accX[G]");
%Create a categorial value of in windfarm
full_trip.location = categorical(full_trip.inField);
full_trip.location = renamecats(full_trip.location, "false", "Transit");
full_trip.location = renamecats(full_trip.location, "true", "Windfarm");
Visualize data
acctable = table(full_trip.duration, full_trip.date, full_trip.accX, full_trip.accY, full_trip.accZ, 'VariableNames', {'duration','date','accX','accY','accZ'});
acctimetable = table2timetable(acctable);
windowlength = 1800;
stdaccY = retime(acctimetable, "regular", @std, "TimeStep", seconds(windowlength));
fig = figure(1);
ax12 = subplot(3, 2, [1,2], 'Parent', fig);
geoplot(ax12, full_trip.lat, full_trip.lon)
ax3 = subplot(3, 2, 3, 'Parent', fig);
stackedplot(ax3, acctable, {'accX','accY','accZ'})
ax4 = subplot(3, 2, 4, 'Parent', fig);
h = plot(ax4, stdaccY.date(1:end-1), stdaccY{1:end-1,["accX","accY","accZ"]}, 'o-')
ylabel(ax4, "Std value from sensor")
legend(h, ["X","Y","Z"], "Location", "northeast")
title(ax4, compose("Vessel Acceleration: ""std"" method, %.1f seconds per window", windowlength))
ax5 = subplot(3, 2, 5, 'Parent' ,fig);
stackedplot(ax5, full_trip, {'roll[deg]','pitch[deg]'})
ax6 = subplot(3, 2, 6, 'parent', fig);
gscatter(ax6, full_trip.date,full_trip.(13), full_trip.location)
3 commentaires
Plus de réponses (0)
Voir également
Catégories
En savoir plus sur Graphics Object Programming dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!