Gussian Curvature calculation problem

8 vues (au cours des 30 derniers jours)
Ashkan Rigi
Ashkan Rigi le 17 Nov 2021
Hello everybody. I have found the below codes on the net which can calculate the gussian curvature but I can not work with that becasuse I have the error of " too many input arguments". I would be thankful if someone help me to use this function.
function [K,H,Pmax,Pmin] = surfature(X,Y,Z),
% SURFATURE - COMPUTE GAUSSIAN AND MEAN CURVATURES OF A SURFACE
% [K,H] = SURFATURE(X,Y,Z), WHERE X,Y,Z ARE 2D ARRAYS OF POINTS ON THE
% SURFACE. K AND H ARE THE GAUSSIAN AND MEAN CURVATURES, RESPECTIVELY.
% SURFATURE RETURNS 2 ADDITIONAL ARGUEMENTS,
% [K,H,Pmax,Pmin] = SURFATURE(...), WHERE Pmax AND Pmin ARE THE MINIMUM
% AND MAXIMUM CURVATURES AT EACH POINT, RESPECTIVELY.
% First Derivatives
[Xu,Xv] = gradient(X);
[Yu,Yv] = gradient(Y);
[Zu,Zv] = gradient(Z);
% Second Derivatives
[Xuu,Xuv] = gradient(Xu);
[Yuu,Yuv] = gradient(Yu);
[Zuu,Zuv] = gradient(Zu);
[Xuv,Xvv] = gradient(Xv);
[Yuv,Yvv] = gradient(Yv);
[Zuv,Zvv] = gradient(Zv);
% Reshape 2D Arrays into Vectors
Xu = Xu(:); Yu = Yu(:); Zu = Zu(:);
Xv = Xv(:); Yv = Yv(:); Zv = Zv(:);
Xuu = Xuu(:); Yuu = Yuu(:); Zuu = Zuu(:);
Xuv = Xuv(:); Yuv = Yuv(:); Zuv = Zuv(:);
Xvv = Xvv(:); Yvv = Yvv(:); Zvv = Zvv(:);
Xu = [Xu Yu Zu];
Xv = [Xv Yv Zv];
Xuu = [Xuu Yuu Zuu];
Xuv = [Xuv Yuv Zuv];
Xvv = [Xvv Yvv Zvv];
% First fundamental Coeffecients of the surface (E,F,G)
E = dot(Xu,Xu,2);
F = dot(Xu,Xv,2);
G = dot(Xv,Xv,2);
m = cross(Xu,Xv,2);
p = sqrt(dot(m,m,2));
n = m./[p p p];
% Second fundamental Coeffecients of the surface (L,M,N)
L = dot(Xuu,n,2);
M = dot(Xuv,n,2);
N = dot(Xvv,n,2);
[s,t] = size(Z);
% Gaussian Curvature
K = (L.*N - M.^2)./(E.*G - F.^2);
K = reshape(K,s,t);
% Mean Curvature
H = (E.*N + G.*L - 2.*F.*M)./(2*(E.*G - F.^2));
H = reshape(H,s,t);
% Principal Curvatures
Pmax = H + sqrt(H.^2 - K);
Pmin = H - sqrt(H.^2 - K);
  3 commentaires
Rik
Rik le 18 Nov 2021
Comment posted as answer by @Ashkan Rigi:
x=[1;2;3];
y=[4;5;6]];
z=[7;8;9];
function [K,H,Pmax,Pmin] = surfature(x,y,z)
"Too many output arguments."
Rik
Rik le 18 Nov 2021
Ashkan, please use flags to attract the attention of site admins and please to comments to respond.
Also, what you posted is not a valid way to call your function. It will result in this error:
Error: Function definition not supported in this context. Create functions in code file.

Connectez-vous pour commenter.

Réponse acceptée

Mathieu NOE
Mathieu NOE le 18 Nov 2021
hello
your function do work if your input data is 2D arrays and not vectors as you did
also remove the comma at the end of this line :
function [K,H,Pmax,Pmin] = surfature(X,Y,Z),
clc
clearvars
% dummy data
N = 25;
[X,Y,Z] = peaks(N);
% plot
figure
surf(X,Y,Z);
[K,H,Pmax,Pmin] = surfature(X,Y,Z)
function [K,H,Pmax,Pmin] = surfature(X,Y,Z)
% SURFATURE - COMPUTE GAUSSIAN AND MEAN CURVATURES OF A SURFACE
% [K,H] = SURFATURE(X,Y,Z), WHERE X,Y,Z ARE 2D ARRAYS OF POINTS ON THE
% SURFACE. K AND H ARE THE GAUSSIAN AND MEAN CURVATURES, RESPECTIVELY.
% SURFATURE RETURNS 2 ADDITIONAL ARGUEMENTS,
% [K,H,Pmax,Pmin] = SURFATURE(...), WHERE Pmax AND Pmin ARE THE MINIMUM
% AND MAXIMUM CURVATURES AT EACH POINT, RESPECTIVELY.
% First Derivatives
[Xu,Xv] = gradient(X);
[Yu,Yv] = gradient(Y);
[Zu,Zv] = gradient(Z);
% Second Derivatives
[Xuu,Xuv] = gradient(Xu);
[Yuu,Yuv] = gradient(Yu);
[Zuu,Zuv] = gradient(Zu);
[Xuv,Xvv] = gradient(Xv);
[Yuv,Yvv] = gradient(Yv);
[Zuv,Zvv] = gradient(Zv);
% Reshape 2D Arrays into Vectors
Xu = Xu(:); Yu = Yu(:); Zu = Zu(:);
Xv = Xv(:); Yv = Yv(:); Zv = Zv(:);
Xuu = Xuu(:); Yuu = Yuu(:); Zuu = Zuu(:);
Xuv = Xuv(:); Yuv = Yuv(:); Zuv = Zuv(:);
Xvv = Xvv(:); Yvv = Yvv(:); Zvv = Zvv(:);
Xu = [Xu Yu Zu];
Xv = [Xv Yv Zv];
Xuu = [Xuu Yuu Zuu];
Xuv = [Xuv Yuv Zuv];
Xvv = [Xvv Yvv Zvv];
% First fundamental Coeffecients of the surface (E,F,G)
E = dot(Xu,Xu,2);
F = dot(Xu,Xv,2);
G = dot(Xv,Xv,2);
m = cross(Xu,Xv,2);
p = sqrt(dot(m,m,2));
n = m./[p p p];
% Second fundamental Coeffecients of the surface (L,M,N)
L = dot(Xuu,n,2);
M = dot(Xuv,n,2);
N = dot(Xvv,n,2);
[s,t] = size(Z);
% Gaussian Curvature
K = (L.*N - M.^2)./(E.*G - F.^2);
K = reshape(K,s,t);
% Mean Curvature
H = (E.*N + G.*L - 2.*F.*M)./(2*(E.*G - F.^2));
H = reshape(H,s,t);
% Principal Curvatures
Pmax = H + sqrt(H.^2 - K);
Pmin = H - sqrt(H.^2 - K);
end

Plus de réponses (0)

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by