Effacer les filtres
Effacer les filtres

Programatically configure arduino in standalone application

17 vues (au cours des 30 derniers jours)
David Wilby
David Wilby le 17 Nov 2021
Modifié(e) : David Wilby le 6 Jan 2022
In a standalone application which uses the Arduino Hardware Support Package, on connecting to the arduino, the "Configure Arduino" dialog is launched, asking the user to specify port, board and path to the ardunio IDE.
Is there a way to programmatically bypass this manual config step?

Réponse acceptée

Kshitij Chhabra
Kshitij Chhabra le 27 Déc 2021
For a clean installation, the IDE Path should be automatically configured when you install the Arduino Support Package. You can check the following MATLAB Answer to debug probable causes.
Additionally, the path can be set by the following command
arduinoio.IDERoot = 'Link To Path'
Hope it helps!
  1 commentaire
David Wilby
David Wilby le 6 Jan 2022
Modifié(e) : David Wilby le 6 Jan 2022
Thanks Kshitij, this didn't completely solve the problem for me but it lead me in the right direction. This is because I'm specifically referring to a deployed application, i.e. isdeployed returns true.
In this case I've found by digging into the arduino class, that you can specify the port and board name, along with the arduino IDE path when instantiating, and this will configure the arduino connection and prevent the 'Configure...' dialog from being presented to the user (which was the undesirable part for me in this case).
for example:
a = arduino('COM4', 'Uno', 'ArduinoIDEPath', 'C:\Program Files\arduino-1.8.16')
The ArduinoIDEPath Name-Value pair is not documented here (https://uk.mathworks.com/help/supportpkg/arduinoio/ref/arduino.html#namevaluepairarguments), but can be found in the source code.

Connectez-vous pour commenter.

Plus de réponses (0)


En savoir plus sur Arduino Hardware dans Help Center et File Exchange




Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by