Pausing simulink in parallel cosimulation
3 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Lukas Polacek
le 30 Nov 2021
Réponse apportée : Gaurav Bhosale
le 1 Déc 2021
Hello,
I have a problem with pausing and continuing to run simulink. I need it for parallel cosimulation. Till now I didn't need parallelization I have used Gazebo pacer, but this does not support parallelization.
I need command how to pause and after next command to run the next step.
Do you have some suggestions about controlling cosimulation from matlab or through S-Function? Or some other way?
Thank you for any suggestion.
0 commentaires
Réponse acceptée
Gaurav Bhosale
le 1 Déc 2021
Hi Lukas,
The parallel co-simulation is not yet supported. i.e. with current pacer block, connecting to multiple Gazebo instance ( with different port number ) is not possible. Like, you can not define port number as variable in pacer block. Further, the preferences are stored in single port number, changing in port number in same MATLAB instance is not possible.
You can execute following commands,
>> parpool
>> numSims = 3;
>> modelname = 'pacerTest';
>> load_system(modelname);
>> simIn(1:numSims) = Simulink.SimulationInput(modelname);
>> simOut = parsim(simIn)
But, as you are running these command in same Gazebo session, execute with parsim will not make any usage of parallel execution.
Further, to 'step' and 'pause' Gazebo, you can make use of following commands in MATLAB.
modename = 'pacerTest';
set_param(modename,'SimulationCommand','start')
set_param(modename,'SimulationCommand','pause')
set_param(modename,'SimulationCommand','step')
Thanks
0 commentaires
Plus de réponses (0)
Voir également
Catégories
En savoir plus sur Gazebo Co-Simulation dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!