The active variant must be configured before the simulation is started for pwm generator
1 vue (au cours des 30 derniers jours)
Afficher commentaires plus anciens
For the Matlab example 'power_PVarray_3500W', I change the inverter from single-phase to three-phase and the pwm generator from single-phase to three-phase bridge (6 pulse).
The following error is displayed :
Block 'power_PVarray_3500W/Inverter Control/PWM_Generator/Modulator type' attempted to change the active variant during simulation. The active variant must be configured before the simulation is started.
0 commentaires
Réponses (1)
Joel Van Sickel
le 13 Juin 2022
Hello Asma,
modifying the "inverter control" block as is likely caused the problem. That block is specifically designed as a single phase inverter controller. It also has a number of internal function calls that could easily break when you start modifying it. You will need to use an alternate controller specifically designed for three phase inverter control. Here is a three phase example: https://www.mathworks.com/help/physmod/sps/ug/250-kw-grid-connected-pv-array.html
Regards,
Joel
Voir également
Catégories
En savoir plus sur Switches and Breakers dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!