6.4 issue with Multi-domain Modelling (Fluid Domain-practice)
15 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Issue occured with the pipe (IL): mdot_A <Does the following block value match the plotted requirement?>
i tried exucuting several number of times from task 1, couldn't able to complete task 3 with this error.
need help on this regards, so i can complete the course
0 commentaires
Réponses (3)
YASIR M. SULIMAN A.
le 18 Août 2022
Modifié(e) : YASIR M. SULIMAN A.
le 18 Août 2022
Same problem from my side as well!!
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1101405/image.png)
Here's the problem:
You need to change the "Volumetric fraction of entrained" value to 0
This is the solution:
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1101420/image.png)
You can pass the the pactice now ...
0 commentaires
LE DANH MANH
le 29 Sep 2023
Can you help me with the issue as the attached image ? The issue is: "Does the following block value match the plotted requirement?
Inertia: w" It can not simulate![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1496514/image.png)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1496514/image.png)
0 commentaires
Voir également
Catégories
En savoir plus sur Foundation and Custom Domains dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!