Effacer les filtres
Effacer les filtres

I am receiving this error : Subscripting a table using linear indexing (one subscript) or multidimensional indexing (three or more subscripts) is not supported.

4 vues (au cours des 30 derniers jours)
When i try to run this code I'm receiving this error:
Subscripting a table using linear indexing (one subscript) or multidimensional indexing (three or more
subscripts) is not supported. Use a row subscript and a variable subscript.
a(1:11) %Imported data from excel
b(1:11) %Imported data from excel
c(1:11) %Imported data from excel
Resultant = sqrt(a*a + b*b + c*c);
Up = 180*atan2(a, sqrt(b*b + c*c))/pi;
Right = 180*atan2(b, sqrt(a*a + c*c))/pi;
while (0 < n < 11)
if (0 < Up || Right > 30)
disp('Fall is detected')
else
disp('No fall')
end
end
  2 commentaires
Dyuman Joshi
Dyuman Joshi le 23 Août 2022
The code you have showed us is incomplete
- There are no a, b anc c values defined/assigned.
- You have not initiated a loop counter nor is the loop counter updating according to conditions.
Surabhi A S
Surabhi A S le 23 Août 2022
Sorry I did not get the 2nd point. Can you just show it with an example

Connectez-vous pour commenter.

Réponse acceptée

Dyuman Joshi
Dyuman Joshi le 23 Août 2022
Modifié(e) : Dyuman Joshi le 23 Août 2022
a = readmatrix('a.xlsx');
b = readmatrix('b.xlsx');
c = readmatrix('c.xlsx');
%I have not suppressed the outcome so you can verify the values of a
%as the first value will be read as NaN (not a number)
a = a(2:11) %Imported data from excel
a = 1×10
-2.3000 -2.6000 -2.4000 -2.9000 -3.6000 2.9000 3.0000 3.6050 3.9800 2.0350
b = b(2:11); %Imported data from excel
c = c(2:11); %Imported data from excel
Resultant = sqrt(a.*a + b.*b + c.*c);
Up = 180*atan2(a, sqrt(b.*b + c.*c))/pi
Up = 1×10
-23.0245 -31.4445 -33.6392 -53.8149 -61.2833 51.4768 67.9266 53.7637 46.6764 33.7866
Right = 180*atan2(b, sqrt(a.*a + c.*c))/pi
Right = 1×10
-25.1592 -34.1804 -36.8788 -24.6751 -14.0999 -3.0929 -21.7576 -30.9710 -30.7839 -47.5465
%since there are 10 elements in the arrays, the index should go from 1-10
n = 1;
while (n < 11)
if (0 < Up(n) | Right(n) > 30)
disp('Fall is detected')
break %breaking the loop
else
disp('No fall')
end
n = n+1;
end
No fall No fall No fall No fall No fall
Fall is detected
  8 commentaires
Surabhi A S
Surabhi A S le 25 Août 2022
When I try to run this, I get values below 0 as well like -30,-40. So only I mentioned above 0
Dyuman Joshi
Dyuman Joshi le 25 Août 2022
That should not be happening, if x>30 then it is automatically x>0
Is your data still the same?

Connectez-vous pour commenter.

Plus de réponses (1)

Abderrahim. B
Abderrahim. B le 23 Août 2022
Hi!
We don't import data from excel that way.
In your case better to use readmatrix:
A = readmatrix(yourFile.xlsx) ;
If you want to have the data as table use readtable:
tbl = readtable(yourFile.xlsx) ;
Hope this helps
  5 commentaires
Dyuman Joshi
Dyuman Joshi le 23 Août 2022
Modifié(e) : Dyuman Joshi le 23 Août 2022
Since you are looking to compare individual values, make this change
%replace
if (0 < Up | Right > 30)
%with
if (0 < Up(n) | Right(n) > 30)
and adjust the loop counter accordingly.

Connectez-vous pour commenter.

Catégories

En savoir plus sur Startup and Shutdown dans Help Center et File Exchange

Produits


Version

R2018a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by