I found this paper that was hlepful https://www.inmotive.com/s/Ingear-Simulation-Instructions-EW06.pdf
How to add gearbox in EV reference application Driveline?
6 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
BLOSSOM FERNANDEZ
le 24 Août 2022
Commenté : BLOSSOM FERNANDEZ
le 7 Août 2023
I do not have access to simscape. In my application, I have a motor connected to a fixed ratio reduction gearbox and that is connected to the transfer case (for my four wheel drive). I need to add a gear box in the drive-line model under the EV reference application example.
cd(setupExample('autoblks/EVReferenceApplicationExample'));helpersetupev
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1107150/image.png)
What additional blocks do I need to add with the gearbox block in order for it to work? more torsional blocks before and after the gearbox? inertia blocks?
The feeback vehcile velocity does not follow the reference velocity with all the different types of connections I have tired so far.
Réponse acceptée
Jongil Lee
le 7 Août 2023
Dear all
I suggest to use 2-way connector instead of Simulink port. Please refer to see below snapshot.
You can change port type from menu.
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1452627/image.png)
Plus de réponses (0)
Voir également
Catégories
En savoir plus sur Powertrain Blockset dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!