ifft
6 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
i Venky
le 13 Oct 2011
Modifié(e) : Mayank Lakhani
le 8 Juil 2015
I want to distort the phase of the frequency spectrum of a signal and not the magnitude. After that I want to find out the ifft considering both magnitude and the new phase. Usually I consider the function as a whole (complex function x) and find ifft(x). But I don't know how to find ifft of mag(x) and a*phase(x) (where 'a' is any constant).How would I do that?
0 commentaires
Réponse acceptée
Honglei Chen
le 13 Oct 2011
Let's assume that the signal is x. So what you could do is
Xf = fft(x);
Xf_mag = abs(Xf);
Xf_phase = angle(Xf);
% do whatever you need to the phase and save to Xf_phase_new
Xf_new = Xf_mag.*exp(1i*Xf_phase_new);
x_new = ifft(Xf_new);
HTH
3 commentaires
Plus de réponses (1)
Mayank Lakhani
le 8 Juil 2015
Modifié(e) : Mayank Lakhani
le 8 Juil 2015
Hi all, I want to have amplitude and phase reconstruction of the signal. My signal is having 40KHz bandwidth and starting frequency is 70Khz to 110 KHz. Suppose my signal is X.
nfft = length(x);
res = fft(y_filt,nfft)/ nfft; % normalizing the fft
f = fs/2*linspace(0,1,nfft/2+1); % choosing correct frequency
res = res(1:nfft/2+1); % amplitude of fft
res2 = fft(res);
now i want to plot frequncy versus amplitude and frequency versus phase. figure, plot(f,abs(res2) where the amplitude shoud be lying from the 70KHz to 110 Khz and same in the Figure(f,angle(res2), the phase shoud be spreaded over 70kHz to 110Khz. So how to chose the correct frequency axes.
0 commentaires
Voir également
Catégories
En savoir plus sur Multirate Signal Processing dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!