- 'rfckt.txline' object: https://www.mathworks.com/help/rf/ref/rfckt.rfckt.txline.html
- 'rfckt.cascade' object: https://www.mathworks.com/help/rf/ref/rfckt.rfckt.cascade.html
- 'sparameters' function: https://www.mathworks.com/help/rf/ref/sparameters.html
How to add lossless txline to each port of 4-port sparameters and save in new touchstone file?
6 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Hello, I am a novice to matlab scripting. I'm having trouble adding 4 lossless transmission lines to each port of an imported 4-port s-parameters and saving to a new touchstone file. I was able to create a single transmission line and plot S21 and angle per the help, but I get stuck after that. Thanks in advance.
0 commentaires
Réponses (1)
Balavignesh
le 4 Oct 2023
Hi BSimono,
As per my understanding, you would like to add 4 lossless transmission lines to each port of an imported 4-port 'S-parameters'.
I would suggest you load the 4-port S-parameters using the 'sparameters' function and define the characteristics of the lossless transmission lines such as 'line_length' and 'line_z0' that you would want to add to each port.
You could use 'rfkct.txline' object to create the transmission line models and you could iterate over each port of the 'S-parameters' to add the transmission models by creating an empty cascade object using the 'rfckt.cascade' function.
You could save the modified S-parameters to a new Touchstone file using the 'write' function.
The following code may help you achieve this:
% Load the original S-parameters file
% original_sparams = sparameters('filename');
% Define the transmission line parameters
line_length = 0.1; % Length of the transmission line (in meters)
line_Z0 = 50; % Characteristic impedance of the transmission line (in Ohms)
% Create the transmission line model
transmission_line = rfckt.txline('LineLength', line_length, 'Z0', line_Z0);
% Create an empty cascade object
modified_sparams = rfckt.cascade;
% Add the transmission line to each port of the cascade using a 'for' loop
% for port = 1:4
% modified_sparams.Elements{end+1} = transmission_line;
% end
% Connect the original S-parameters to the cascade
% modified_sparams.Elements{end+1} = original_sparams;
% Save the modified S-parameters to a new Touchstone file using 'write'
Kindly refer to the following documentation links to have more information on:
Hope that helps !
Balavignesh
Voir également
Catégories
En savoir plus sur Data Import and Network Parameters dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!