# How to generate a noise which sums up as zero?

5 vues (au cours des 30 derniers jours)
ANANTA BIJOY BHADRA le 1 Août 2023
I have a sinusoidal downsampled signal. the size of the singal is 1*64. I need to add noise to that signal where sum of noise would be zero. How can I do that? The varience would be 0.001. I am new in this and don't have idea about this. I tried with randn command but I could get that? I tried the follwoing noise:
noise=randn(1,64)*sqrt(0.001)*240.
240 is the peak value of the singal and it has to be there.
##### 0 commentairesAfficher -2 commentaires plus anciensMasquer -2 commentaires plus anciens

Connectez-vous pour commenter.

### Réponses (1)

David Goodmanson le 1 Août 2023
Modifié(e) : David Goodmanson le 1 Août 2023
Hi Ananta,
noise=randn(1,64)*sqrt(0.001)*240
noise = noise - mean(noise);
if you subtract off the mean, then the new sum of the noise = 0.
Ordinarily you would add noise (variance=.001 in this case) to the signal. If you multiply the noise by 240, now its variance is up around 58 which may or may not be what you want.
##### 0 commentairesAfficher -2 commentaires plus anciensMasquer -2 commentaires plus anciens

Connectez-vous pour commenter.

### Catégories

En savoir plus sur Spectral Measurements dans Help Center et File Exchange

R2022a

### Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by