Change specific colour in an image
55 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Hi everybody
I have to change the colors of an object in a picture but when i change red to black, it also change the orange colour. Can you help me solve this please ?
a = imread('coloredChips.png');
figure(1), imshow(a);
% Creat menu of color
disp('Color selection')
disp('r for red')
disp('b for blue')
disp('y for yellow')
% Now we want input from user to tell us which color to change
x = input(' Please select the color you want to change: ','s');
copy = a;
dimension = size(a);
row_n = dimension (1);
col_n = dimension (2);
switch x
case 'r'
for row = 1:row_n
for col = 1:col_n
pixel_red = a(row,col,1);
pixel_green = a(row,col,2);
pixel_blue = a(row,col,3);
if (pixel_red >= 200) && (pixel_green <= 50) && (pixel_green >= 5) && (pixel_blue <= 80) && (pixel_blue >=15)
copy(row,col,1) = 0;
copy(row,col,2) = 0;
copy(row,col,3) = 0;
end
end
end
otherwise
disp('Incorrect selection, please choose from the menu');
end
% display the modified image
figure(2),imshow(copy);
6 commentaires
DGM
le 28 Mar 2024
Modifié(e) : DGM
le 28 Mar 2024
coloredChips.png is a standard image that comes with MATLAB.
which coloredChips.png
The copy that OP attached is a screenshot of the original, which has been resized, padded, and converted to a degraded indexed-color copy.
The proposal to use JPG will only make the damage worse. To expand upon the comment I gave below:
% read the original image
goodpict = im2double(imread('coloredChips.png'));
% read the screenshot and try to fix it
[indpict map] = imread('screenshot.png');
badpict = ind2rgb(indpict,map); % convert to RGB
imwrite(badpict,'worsescreenshot.jpg'); % convert to a trash-quality JPG
badpict = im2double(imread('worsescreenshot.jpg'));
badpict = imcrop(badpict,[90.51 29.51 517.98 390.98]); % crop off the padding
badpict = imresize(badpict,size(goodpict,1:2)); % return to original size
% the error is strongest near edges
err = normalize(abs(goodpict-badpict),'range');
imshow(err,'border','tight')
I'm not showing it here, but MSE only tripled by using JPG. That might almost seem like a small change, but look at the apparent resolution of the error map. The image saved by MATLAB is a 75% 4:2:0 JPG. You're throwing away 75% of your chroma information, when your task is critically dependent on using that chroma information.
Using JPG as part of an image processing routine is never the answer.
Dyuman Joshi
le 30 Mar 2024
"coloredChips.png is a standard image that comes with MATLAB."
I was not aware about this. Thanks for the info!
Réponses (3)
DGM
le 28 Mar 2024
Déplacé(e) : DGM
le 28 Mar 2024
See also:
While this same assignment has been answered before, this is probably the first time that someone tried doing it with an indexed-color screenshot of the test image. The version of the file that comes with MATLAB is already RGB.
inpict = imread('coloredChips.png');
size(inpict) % you should already have a clean RGB copy
This is worth pointing out, since I see no point in using a degraded screenshot when you already have the original image.
% read the original image
goodpict = im2double(imread('coloredChips.png'));
% read the screenshot and try to fix it
[indpict map] = imread('screenshot.png');
badpict = ind2rgb(indpict,map); % convert to RGB
badpict = imcrop(badpict,[90.51 29.51 517.98 390.98]); % crop off the padding
badpict = imresize(badpict,size(goodpict,1:2)); % return to original size
% the error is strongest near edges
err = normalize(abs(goodpict-badpict),'range');
imshow(err,'border','tight')
0 commentaires
Pramil
le 28 Mar 2024
Modifié(e) : Pramil
le 28 Mar 2024
Hi Phat,
What you are doing is correct, but in MATLAB pixel values are normalized that means each pixel ranges from “0” to “1” and not from “0” to “255” as you can see in the following link :
When extracting individual pixel, multiply each value with “255” and your code works just fine.
Here is an updated code that works fine in MATLAB R2023b:
[img, map] = imread('coloredChips.png');
a = ind2rgb(img, map);
if size(a, 3) ~= 3
error('The image must be an RGB image.');
end
figure(1), imshow(a);
% Creat menu of color
disp('Color selection')
disp('r for red')
disp('b for blue')
disp('y for yellow')
% Now we want input from user to tell us which color to change
%x = input(' Please select the color you want to change: ','s');
x = 'r';
copy = a;
dimension = size(a);
row_n = dimension (1);
col_n = dimension (2);
switch x
case 'r'
for row = 1:row_n
for col = 1:col_n
pixel_red = a(row,col,1)*255;
pixel_green = a(row,col,2)*255;
pixel_blue = a(row,col,3)*255;
if (pixel_red >= 200) && (pixel_green <= 50) && (pixel_green >= 5) && (pixel_blue <= 80) && (pixel_blue >=15)
copy(row,col,1) = 0;
copy(row,col,2) = 0;
copy(row,col,3) = 0;
end
end
end
otherwise
disp('Incorrect selection, please choose from the menu');
end
% display the modified image
figure(2),imshow(copy);
Hope this helps.
3 commentaires
Pramil
le 16 Août 2024 à 4:29
Modifié(e) : Pramil
le 16 Août 2024 à 4:31
@Brett Shoelson and @DGM Thank you for pointing that out! I appreciate the correction and your help in improving my understanding.
Image Analyst
le 15 Août 2024 à 21:59
Simply use the Color Thresholder app on the Apps tab of the tool ribbon to create a mask for the red chips. Then use that mask to blacken the red chips. Full Demo:
% Demo by Image Analyst
clc; % Clear the command window.
close all; % Close all figures (except those of imtool.)
clear; % Erase all existing variables. Or clearvars if you want.
workspace; % Make sure the workspace panel is showing.
format long g;
format compact;
%--------------------------------------------------------------------------------------------------------
% READ IN TEST IMAGE
folder = [];
baseFileName = 'coloredChips.png';
fullFileName = fullfile(folder, baseFileName);
% Check if file exists.
if ~exist(fullFileName, 'file')
% The file doesn't exist -- didn't find it there in that folder.
% Check the entire search path (other folders) for the file by stripping off the folder.
fullFileNameOnSearchPath = baseFileName; % No path this time.
if ~exist(fullFileNameOnSearchPath, 'file')
% Still didn't find it. Alert user.
errorMessage = sprintf('Error: %s does not exist in the search path folders.', fullFileName);
uiwait(warndlg(errorMessage));
return;
end
end
rgbImage = imread(fullFileName);
%--------------------------------------------------------------------------------------------------------
% DISPLAY THE ORIGINAL IMAGE
subplot(2, 2, 1);
imshow(rgbImage, []);
impixelinfo;
axis('on', 'image');
title('Original RGB Image', 'FontSize', fontSize, 'Interpreter', 'None');
% Update the dimensions of the image.
% numberOfColorChannels should be = 1 for a gray scale image, and 3 for an RGB color image.
[rows, columns, numberOfColorChannels] = size(rgbImage);
% Maximize window.
g = gcf;
g.WindowState = 'maximized';
g.Name = 'Demo by Image Analyst';
g.NumberTitle = 'off';
drawnow;
%--------------------------------------------------------------------------------------------
% MASK THE IMAGE.
[mask,maskedRGBImage] = createMask(rgbImage);
% Take the largest 6 blobs.
mask = bwareafilt(mask, 6);
subplot(2, 2, 2);
imshow(mask)
impixelinfo;
axis('on', 'image');
title('Red Mask', 'FontSize', fontSize, 'Interpreter', 'None');
drawnow;
%--------------------------------------------------------------------------------------------
% BLACKEN THE RED CHIPS USING THE MASK.
% Mask the image with the new mask by multiplying each channel by the mask.
% Invert the mask with ~ so that the red will turn to black.
maskedRgbImage = rgbImage .* cast(~mask, 'like', rgbImage);
% Show the masked image with red now turned into black..
subplot(2, 2, 3);
imshow(maskedRgbImage)
impixelinfo;
axis('on', 'image');
title('Masked RGB Image', 'FontSize', fontSize, 'Interpreter', 'None');
%===============================================================================================
% FUNCTION EXPORTED BY THE COLOR THRESHOLDER APP
function [BW,maskedRGBImage] = createMask(RGB)
%createMask Threshold RGB image using auto-generated code from colorThresholder app.
% [BW,MASKEDRGBIMAGE] = createMask(RGB) thresholds image RGB using
% auto-generated code from the colorThresholder app. The colorspace and
% range for each channel of the colorspace were set within the app. The
% segmentation mask is returned in BW, and a composite of the mask and
% original RGB images is returned in maskedRGBImage.
% Auto-generated by colorThresholder app on 15-Aug-2024
%------------------------------------------------------
% Convert RGB image to chosen color space
I = rgb2hsv(RGB);
% Define thresholds for channel 1 based on histogram settings
channel1Min = 0.907;
channel1Max = 0.005;
% Define thresholds for channel 2 based on histogram settings
channel2Min = 0.401;
channel2Max = 1.000;
% Define thresholds for channel 3 based on histogram settings
channel3Min = 0.408;
channel3Max = 1.000;
% Create mask based on chosen histogram thresholds
sliderBW = ( (I(:,:,1) >= channel1Min) | (I(:,:,1) <= channel1Max) ) & ...
(I(:,:,2) >= channel2Min ) & (I(:,:,2) <= channel2Max) & ...
(I(:,:,3) >= channel3Min ) & (I(:,:,3) <= channel3Max);
BW = sliderBW;
% Initialize output masked image based on input image.
maskedRGBImage = RGB;
% Set background pixels where BW is false to zero.
maskedRGBImage(repmat(~BW,[1 1 3])) = 0;
end
0 commentaires
Voir également
Catégories
En savoir plus sur Image Processing Toolbox dans Help Center et File Exchange
Produits
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!