Time-dependent dynamic problem with nonlinear stiffness using ode45
44 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
I am solving a time-dependent finite element problem with nonlinearities in the stiffness matrix which takes the following form:
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1730356/image.png)
where the dot symbolizes derivative with respect to time, U is the displacement vector, M is the mass matrix, C is the damping matrix, K(U) is the stiffness matrix which depends on U, and F is an external force. I would like to use ode45 to solve the dynamic problem. The general flow for solving this problem would be the following:
- Calculate the stiffness matrix K using the latest displacement U (Initial condition if it is the first time step).
- Formulate the state-space equations using K matrix, M matrix, C matrix, and F vector.
- Integrate the state-space equations with ode45 to caclulate the new displacement U.
- Recalculate the K matrix with the new displacement U. Check if the residual error meets the preselected tolerance.
- If the error is met, update velocities and accelerations, and go to the next time step. If the error is not met, then go back to step 1 using this latest K matrix.
I am familiar with solving this problem without the nonlinearity in K. However, I am unsure how to update the K matrix at every time step within the ode45 framework.
Thank you for the guidance!
0 commentaires
Réponses (1)
Torsten
le 8 Juil 2024 à 19:50
Déplacé(e) : Torsten
le 8 Juil 2024 à 19:50
You solve for U and Udot - thus you get values for U and Udot from ode45. Simply compute the matrix K(U) with these values and proceed as if K was constant.
4 commentaires
Torsten
le 9 Juil 2024 à 17:04
Modifié(e) : Torsten
le 9 Juil 2024 à 17:28
Example:
M = [1 0;0 4];
invM = inv(M);
C = [4 -2;6 3];
K = @(u)[u(1) sin(u(2));exp(-u(2)) 1/u(1)];
F = [0 ;0];
tspan = [0 1];
y0 = [1; 2 ;3; 4]; % vector of initial values for (u(1),u(2),udot(1),udot(2))
[T,Y] = ode45(@(t,y)fun(t,y,invM,C,K,F),tspan,y0);
plot(T,[Y(:,1),Y(:,2)])
grid on
function dy = fun(t,y,invM,C,K,F)
n = numel(y)/2;
u = y(1:n);
udot = y(n+1:2*n);
dy = zeros(2*n,1);
dy(1:n) = udot;
dy(n+1:2*n) = invM*(F-C*udot-K(u)*u);
end
Voir également
Catégories
En savoir plus sur Ordinary Differential Equations dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!