What are the MATLAB modules are needed to purchase for simulating the Chopper operated DC MOTOR

I need a help on purchasing MATLAB modules ,there are many modules on the quatation list ,i was little confused about the modules.

Project Details:

Battery operated choppers controlling the Traction motor

Input Battery voltage is varying 350-384

output Dc-voltage and current also varying according with the input from the Pilot,

Please Let me help and guide what are the modules are required for this project.

Answer 1

[Ayush]

Hello Prasanna,

Based on the project details shared, here is a possible list of MathWorks products which would be beneficial for your use case:

1. Simscape Electrical : For detailed electrical modelling of the battery operated chopper and the traction motor.

https://www.mathworks.com/products/simscape-electrical.html

2. Control System Toolbox: For designing and tuning the algorithms responsible for different components of the project and its operation.

https://www.mathworks.com/products/control.html

3. Stateflow: Along with the Contol System Toolbox, to develop the logic behind different states of the machine.

https://www.mathworks.com/products/stateflow.html

4. Optimization Toolbox: For optimizing the parameters in your case input voltage to achieve the desired output.

https://www.mathworks.com/products/optimization.html

5. Signal Processing Toolbox: For conditioning the output generated from the optimized input signals given by the Pilot.

https://www.mathworks.com/products/signal.html

Hope this provides you a good direction towards the choice of MathWorks products for your project!