How to calculate the NN outputs manually?
8 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Darshana Abeyrathna
le 6 Mai 2016
Réponse apportée : hassan khatir
le 19 Juil 2023
Can anyway help me explaining manual calculation for testing outputs with trained weights and bias? Seems it does not give the correct answers when I directly substitute my inputs to the equations (Transfer function equations). Answers are different than what I get from MATLAB NN toolbox. How is it possible to get a large number as an output (eg: 100) when the output node has a transfer function, because as an example output from the "logistic" transfer function is always between 0 and 1?
0 commentaires
Réponse acceptée
Matthew Eicholtz
le 6 Mai 2016
If you use a squashing function on the output, then yes, it is impossible to get a result of 100 at an output. If you need to have outputs outside [0,1] or [-1,1], which are typical ranges for many squashing functions, I suggest using a linear transfer function on the output (or a rectified linear unit).
As for your main question, here is an example of how to calculate outputs manually if you have trained weights and biases. Suppose you had an input x that is 100-by-1 and 1000 hidden layer neurons (so a weight matrix w1 that is 100-by-1000 and bias b1 that is 1000-by-1).
Then, the input to the hidden layer is
z1 = w1'*x+b1;
and the output of the hidden layer is
h1 = f(z1); %where f is the hidden activation function (e.g. logistic, tanh, ReLU)
Next, if you have a single neuron in the output layer, you would have a second weight matrix w2 that is 1000-by-1 and a scalar bias b2. The output to the whole network is then given by
z2 = w2'*h+b2;
h2 = g(z2); %where g is the output activation function, not necessarily the same as f()
Hope this helps!
Plus de réponses (2)
Greg Heath
le 8 Mai 2016
By default,
1. The hidden node transfer function is TANSIG (TANH)
2. The output node transfer function is PURELIN (LINEAR)
3. Inputs and targets will be AUTOMATICALLY transformed
to [-1,1] for calculating purposes
4. The outputs will be AUTOMATICALLY transformed from
[ -1,1] to the original target scale.
Hope this helps.
Greg
2 commentaires
Amir Qolami
le 12 Avr 2020
For apply mapminmax to inputs:
xoffset = net.Inputs{1}.processSettings{1}.xoffset; gain = net.Inputs{1}.processSettings{1}.gain; ymin = net.Inputs{1}.processSettings{1}.ymin; In0 = bsxfun(@plus,bsxfun(@times,bsxfun(@minus,inputs,xoffset),gain),ymin);
And for apply reverse mapminmax to outputs:
gain = net.outputs{end}.processSettings{:}.gain; ymin = net.outputs{end}.processSettings{:}.ymin; xoffset = net.outputs{end}.processSettings{:}.xoffset; output = bsxfun(@plus,bsxfun(@rdivide,bsxfun(@minus,outputs,ymin),gain),xoffset);
hassan khatir
le 19 Juil 2023
use this function:
function y2=sim2(net,x)
xoffset=net.inputs{1}.processSettings{1}.xoffset;
gain=net.inputs{1}.processSettings{1}.gain;
ymin=net.inputs{1}.processSettings{1}.ymin;
w1 = net.IW{1}; % (10x6)
w2 = net.LW{2}; % (2x10)
b1 = net.b{1}; % (10x1)
b2 = net.b{2};
% Input 1
y1 = (x-xoffset).*gain+ymin;
% Layer 1
a1 = 2 ./ (1 + exp(-2*(repmat(b1,1,size(x,2)) + w1*y1))) - 1;
% output
outputs=repmat(b2,1,size(x,2)) + w2*a1;
gain = net.outputs{2}.processSettings{:}.gain;
ymin = net.outputs{2}.processSettings{:}.ymin;
xoffset = net.outputs{2}.processSettings{:}.xoffset;
y2 = (outputs-ymin)./gain + xoffset;
end
0 commentaires
Voir également
Catégories
En savoir plus sur Define Shallow Neural Network Architectures dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!