Timeseries using startdate - plot with events

Hi, I have some difficulties displaying correctly timeseries with events in a plot with Matlab r2016b). In my case, I have a same startdate defined for my timeserie and all the events. When I plot the timeseries, the datatip for the second (and following) event displays the information of the first one.Hereafter is a simple example reproducing my issue:

    test1 = timeseries();
    test1.Time = [1 2 3 4 5];
    test1.TimeInfo.Format= 'yyyy-mm-dd HH:MM:SS.FFF';
    test1.TimeInfo.Units = 'seconds';
    test1.TimeInfo.StartDate= '2018-01-01 00:00:00.000';
    test1.Data = [2 1 4 1 4]';
    event1 = tsdata.event('event1',2.0001);
    event1.StartDate= '2018-01-01 00:00:00.000';
    event2 = tsdata.event('event2', 3.45001);
    event2.StartDate= '2018-01-01 00:00:00.000';
    test1 = test1.addevent(event1);
    test1 = test1.addevent(event2);
    figure
    subplot(1,1,1)
    plot(test1)

What can I do to have a correct display of my events?

[Faustine Delhay]

I don't have this issue with Matlab r2016a. But I have another one when I combine time series with and without event in a plot. If the last time serie is without event, the events data from the first time serie are not displayed correctly :

    test1 = timeseries();
    test1.Time = [1 2 3 4 5];
    test1.TimeInfo.Format= 'yyyy-mm-dd HH:MM:SS.FFF';
    test1.TimeInfo.Units = 'seconds';
    test1.TimeInfo.StartDate= '2018-01-01 00:00:00.000';
    test1.Data = [2 1 4 1 4]';
    event1 = tsdata.event('event1',2.0001);
    event1.StartDate= '2018-01-01 00:00:00.000';
    event2 = tsdata.event('event2', 3.45001);
    event2.StartDate= '2018-01-01 00:00:00.000';
    test1 = test1.addevent(event1);
    test1 = test1.addevent(event2);
    test2 = timeseries();
    test2.Time = [1 2 3 4 5];
    test2.TimeInfo.Format= 'yyyy-mm-dd HH:MM:SS.FFF';
    test2.TimeInfo.Units = 'seconds';
    test2.TimeInfo.StartDate= '2018-01-01 00:00:00.000';
    test2.Data = [5 5 5 5 5]';
    figure(2)
    subplot(1,1,1)
    plot(test1)
    hold on
    plot(test2)
    hold off

Answer 1

[Adriano Bittar]

Try to use the following format to define the StartDate:

test1.TimeInfo.StartDate= datenum(2018,01,01,0,0,0);
event2.StartDate= datestr(datenum(2018,01,01,0,0,0)));