delay in Simulink Matlab function block
18 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Hi,
I want to do something very simple, but since I've failed to find a way, I turn to you :-)
I use a Matlab function block in a Simulink model.
I have an input (PumpOn) which switches on, and off (0-1) When it switches on, I want to wait (delay), then change the output to AirExDCInvO2.
I want to keep that output for the same time (delay), then set the output back to zero.
The time I want to wait, is simulated time, not real time.
The model should keep simulating, while the delay is active.
I have tried to use pause, but I think it only pauses simulation. I have tried a timer, but timer is not supported in the Matlab fcn code generation.
The code from the matlab function block is shown below.
Thanks for reading :-)
Hans
function y = InvalidO2Control(PumpOn, delay, AirExDCInvO2)
y = 0;
if PumpOn == 1 %pump is switched on
pause(delay) % Let the pump run for a while, before doing anything
y = AirExDCInvO2; % set the output (open valve)
pause(delay) % let the valve be open for a while, while pump is still running
y = 0; % close the valve ( pump continues to run)
end
end
0 commentaires
Réponses (1)
Fangjun Jiang
le 6 Déc 2018
It looks like the Delay block in Simulink could meet your need.
3 commentaires
Fangjun Jiang
le 7 Déc 2018
Keep in mind that MATLAB Function block is just like any other Simulink block. It is running at every simulation step. What you need is to have a persistent variable to serve as the timer/counter and then decide the output based on the timer/counter value.
Fangjun Jiang
le 7 Déc 2018
Or, if you have the Stateflow toolbox, use absolute time temporal logic
web(fullfile(docroot, 'stateflow/examples/using-absolute-time-temporal-logic.html'))
Voir également
Catégories
En savoir plus sur Event Functions dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!