print output in table format and print the max value
5 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
clear all
clc
% Density, kg/m^3
rho=210;
T=2.5;
% Volume , m^3
V=0.018457;
% Diameters, m
for D= [0.05 0.10 0.15 0.20]
% Height, m
H=(V/D^2)*(4/pi);
% Specific rate, kg/m^2h
SR=(H*rho)/T;
fprintf('Dia :%d Height :%d SR :%d\n', [D H SR].')
end
Output Result:
Dia :0.05 Height :9.40007 SR :789.606
Dia :0.1 Height :2.35002 SR :197.402
Dia :0.15 Height :1.04445 SR :87.734
Dia :0.2 Height :0.587505 SR :49.3504
But i need to print the output results like below:
Also need to print, the optimum value is: (Maximum SR value)
Dia: 0.05 Height: 9.40007 SR: 789.606
0 commentaires
Réponse acceptée
Stephen23
le 29 Déc 2018
Modifié(e) : Stephen23
le 29 Déc 2018
% Density, kg/m^3
rho = 210;
T = 2.5;
% Volume , m^3
V = 0.018457;
% Diameters, m
D = [0.05 0.10 0.15 0.20];
% Height, m
H = (V./D.^2)*(4/pi);
% Specific rate, kg/m^2h
SR=(H*rho)/T;
% Print:
fprintf('%9s %9s %9s\n','Dia','Height','SR')
fprintf('%9g %9g %9g\n',[D;H;SR])
prints:
Dia Height SR
0.05 9.40007 789.606
0.1 2.35002 197.402
0.15 1.04445 87.734
0.2 0.587505 49.3504
and then:
>> [val,idx] = max(SR);
>> fprintf('Best: Dia: %g Height: %g SR: %g\n',D(idx),H(idx),val)
Best: Dia: 0.05 Height: 9.40007 SR: 789.606
Plus de réponses (1)
Voir également
Catégories
En savoir plus sur Scope Variables and Generate Names dans Help Center et File Exchange
Produits
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!