Set Arduino IDE path
12 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Roberto Belotti
le 2 Jan 2019
Commenté : Madhu Govindarajan
le 28 Jan 2019
I just installed the hardware support package for Arduino, but it doesn't work. I think that the problem is that the package cannot find my installation of Arduino IDE. When I run the command arduinoio.ideroot I get the string 'arduino-1.8.1', which is not even close to the actual path of my Arduino IDE (i.e. 'C:\Program Files (x86)\Arduino')
Do you know how can I set the path properly? Thanks!
0 commentaires
Réponse acceptée
Madhu Govindarajan
le 4 Jan 2019
To set your expectations correctly, MATLAB Support package attempts to install its own Arduino IDE which is 1.8.1 and that is the one it is supposed to find when you type arduinoio.IDERoot.
If the output is just arduino1.8.2, there could be an installation issue. Can you try uninstalling the support package and reinstalling them with administrator access. You can do that by right clicking on MATLAB icon and selecting Run as administrator.
After this you can check again with the same command and the default location is inside C:\ProgramData\MATLAB\Supportpackages\<Release>\3P.instrset\arduinoide.instrset\arduino-1.8.1
HTH,
Madhu
2 commentaires
Plus de réponses (1)
amina ibrahim
le 28 Jan 2019
my matlab is on E/ and support package is now on c/ where should i move it on matlab installaton ?
to bin ?
1 commentaire
Madhu Govindarajan
le 28 Jan 2019
Hi amina,
I am not sure where you saw that one should move the support package location between different drives, but I would recommend not to do that. Can you detail what your issues are running into and what you have tried so far?
Madhu
Voir également
Catégories
En savoir plus sur Setup and Configuration dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!