Implementing QPSK modulation and Demodulation
9 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
I have implemented QPSK modulation and demodulation system but does not give the 4 constellation points from the qpsk modulator block. The output is displayed on to discrete-time scatter plot scope and shows only 2 constellation points when I run the simulation. I have used Bernoulli binary generator for ease of analyzing and to generate a 2stage square wave.
0 commentaires
Réponse acceptée
Rob Graessle
le 26 Jan 2011
The Bernoulli generator block is only going to generate a square wave with a value of 0 or 1. This explains why you are only seeing two constellation points at the output of the QPSK modulator. For QPSK, you want to have a message signal with possible values of 0, 1, 2 or 3 as an input to the QPSK modulator block. The Random Integer Generator block should do what you're looking for.
Or, you could still use the Bernoulli generator block with the output set to 2 samples per frame, and configure the QPSK modulator block to accept Bit input instead of Integer input.
2 commentaires
Rahool
le 15 Nov 2011
how to implement qpsk modulator and demodulator using square root raised cosine function as shaping pulse
Plus de réponses (0)
Voir également
Catégories
En savoir plus sur QPSK dans Help Center et File Exchange
Produits
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!