how to plot this function
3 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/220049/image.jpeg)
4 commentaires
Walter Roberson
le 18 Mai 2019
(n<-2 & n>2)
is never true. However, since you are multiplying that by 0, if it somehow did match it would contribute 0 anyhow. You can just leave out that term.
Your x axis is wrong. You are effectively using your n as your frequency, including negative n. If you are going to plot negative frequencies then you need to fftshift() . And use more points.
Read the first example of fft() to see how to properly plot.
Réponses (2)
Sulaymon Eshkabilov
le 18 Mai 2019
n = -5:1:5;
x=1*(n>=-2 & n<=2)+0*(n<-2 & n>2);
L = length(n); Fs = 1;
Nblock = 128; % Block size
Y = fft(x, Nblock)/L;
f = Fs/2*linspace(0,5, Nblock/2+1);
plot(f, 2*abs(Y(1:Nblock/2+1)))
xlabel('frequency, [Hz]'), ylabel('Amplitude')
title('Single-sided Spectrum'), shg
3 commentaires
Sulaymon Eshkabilov
le 18 Mai 2019
Hi,
Here is the full spectrum calculation:
n = -5:1:5;
x=1*(n>=-2 & n<=2);
L = length(n); Fs = 1;
Nblock = 128; % Block size
Y = fft(x, Nblock)/L;
f = Fs/2*linspace(0,5, Nblock);
plot(f, 2*abs(Y(1:Nblock)))
xlabel('frequency, [Hz]'), ylabel('Amplitude')
title('Single-sided Spectrum'), shg
Good luck.
4 commentaires
Walter Roberson
le 19 Mai 2019
t = linspace(0,10);
ft = fft(t);
subplot(1,2,1); plot(abs(ft)); %what you are doing now
subplot(1,2,2); plot(abs(fftshift(ft))); %what you need to do in order to get the 0 in the center
Voir également
Catégories
En savoir plus sur Annotations dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!