Embedded coder with Zybo Z7-10 does not work

The current available Linux image for the deprecated Zybo boad does not work with the new either Zybo Z7-10 or Z7-20. It will be nice if we can use SoC workflow with these new Zybo Z7-10 and Zybo Z7-20. These boards I use them in my course and project in our university. The current boot Linaro Linux provided by Simulink boot the system however I am getting unreadable characters.

It will be very helpful if you can help in fixing this problem.

Also any help to fix this problem is highly appreciated.

Answer 1

[Luis Omar]

1.- In your sdcard, use Gparted to make two partitions, the first one is a fat32 type, the second one a linux ext4 partition.

2.- In the first one put in the boot files

https://github.com/mathworks/buildroot/releases/download/mathworks_zynq_R18.2.0/zybo_sdcard_zynq7000ec_2018-07-10.zip

3.- insert the sdcard into the sd slot in the zybo z7

4.- Start putty and set 115200/8/1/N/

5. Press the reset, the ps-srts button, you will see how the Linux system boots

However, the messages can not be read, I am stuck