using fprintf for answers
3 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
alexis cordova
le 26 Juil 2019
Modifié(e) : per isakson
le 27 Juil 2019
Trying to get my answer to look like the table below
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/231510/image.png)
these are my results it is a little off and answers are also in exponential form trying to change that too
fprintf('\r\r%s\n', ' CP 2 - STRAIN TRANSFORMATION FOR UNIFORM MOTION')
fprintf('\r\r%s\n', 'Material Properties ')
fprintf('%s%8.3f\n', 'Youngs Modulus' ,YM )
fprintf('%s%8.3f\n', 'Poissons Ratio' ,v )
fprintf('\r\r%s\n', 'Deformation Gradient')
fprintf('%s%8.3f\n', ' ---------F------- ' ,F)
fprintf('\r\r%s\n', 'Strain Tensor\n')
fprintf('%s%8.3f\n', '-------E------',E)
fprintf('\r\r%s\n', 'Principal Strains')
fprintf('%s%s%8.3f\n', ' e1 ',E1)
fprintf('%s%s%8.3f\n', ' e2 ',E2)
fprintf('\r\r%s\n', 'Principal Stress')
fprintf('%s%s%8.3f\n', 's1 ',S1)
fprintf('%s%s%8.3f\n', ' e2 ',S2,'\')
My results are
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/231511/image.png)
0 commentaires
Réponse acceptée
Walter Roberson
le 26 Juil 2019
fprintf('%s%8.3f\n', '-------E------',E)
Your E is a vector with at least 4 values. If we assume that E has 4 values, then your code is equivalent to
fprintf('%s%8.3f\n%s%8.3f\n%s', '-------E------',E(1), E(2), E(3), E(4))
which will try to display E(2) with a %s format.
More likely to be correct would be
fprintf('%s\n', '-------- E --------');
fprintf('%8.3f %8.3f\n', E.'); %notice the transpose
Without the transpose, the first line would display E(1) and E(2) and the second would display E(3) and E(4) -- but those are E(1,1), E(2,1), E(1,2), E(2,2) so values "down" the columns would be displayed across.
0 commentaires
Plus de réponses (1)
per isakson
le 27 Juil 2019
Modifié(e) : per isakson
le 27 Juil 2019
This supplements Walter's answer.
Replace
fprintf('\r\r%s\n', 'Strain Tensor\n')
by
fprintf('\r\r%s\n', 'Strain Tensor')
and replace
fprintf('%s%s%8.3f\n', ' e1 ',E1)
fprintf('%s%s%8.3f\n', ' e2 ',E2)
by
fprintf('%s= %11.6f ', ' e1 ', E1 );
fprintf('%s= %11.6f\n', ' e2 ', E2 );
and replace
fprintf('%s%s%8.3f\n', 's1 ',S1)
fprintf('%s%s%8.3f\n', ' e2 ',S2,'\')
by
fprintf('%s= %11.6f ', ' s1 ', S1 );
fprintf('%s= %11.6f\n', ' s2 ', S2 );
Adjust the number of spaces as needed.
Add the "Stress Tensor" group.
0 commentaires
Voir également
Catégories
En savoir plus sur Stress and Strain dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!