Why does gpuArray() error out?
5 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
What does the error mean?
>> A = gpuArray( rand(1024) );
There is a problem with the graphics driver or with this GPU
device. Be sure that you have a supported GPU and that the latest
driver is installed.
Caused by:
The CUDA driver could not be loaded. The library name used was
'/usr/local/cuda/lib/libcuda.dylib'. The error was:
dlopen(/usr/local/cuda/lib/libcuda.dylib, 10): image not found
>>
2 commentaires
Jackson Burns
le 13 Août 2019
I would reccomend updating/re-installing your graphics driver to see if that solves the problem.
Réponses (1)
Joss Knight
le 13 Août 2019
Make sure you have read this: https://uk.mathworks.com/matlabcentral/answers/442324-can-i-use-matlab-with-an-nvidia-gpu-on-macos-10-14-mojave
13 commentaires
Walter Roberson
le 17 Août 2019
Note: eGPU on Mac only officially supports some AMD Radeon .
However: Your MacPro mid 2012 13" appears to be model MacBookPro9,2 with 1280 by 800 resolution internal. That model has two USB3.0 connectors, and a Firewire 800 connector, and a Thunderbolt 1 connector. You would therefore not be able to use any of the external GPUs that need Thunderbolt 3 connectors.
I happen to have the very next model up, the mid 2012 15.4 inch, which I took the upgraded display resolution on. It has a GeForce GT 650M as well as HD 4000. However, I effectively do not use that system now; the memory limitations (8 Gb) were getting tiresome, and the hard drive started to whine.
Voir également
Catégories
En savoir plus sur GPU Computing dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!