Info
Cette question est clôturée. Rouvrir pour modifier ou répondre.
Can I implement a controller that uses an external physical device to control the simscape physical model motion?
1 vue (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Can I implement a controller that uses an external physical device to control the simscape physical model motion?
0 commentaires
Réponses (2)
Jonas
le 19 Août 2019
If you want to combine a physical external signal with a Simscape model, you will need to run the Simscape model in real-time and you need real-time capable hardware. This means you need to run Simulink Real-time with SpeedGoat real-time hardware with the Simscape model running on a progammable FPGA with HDL Coder. The Simscape model needs to be linearized by the HDL Coder Advisor.
0 commentaires
Roshni Garnayak
le 22 Août 2019
To include an external device to your Simscape model, you need to use hardware-in-loop (HIL) simulation. This is possible by configuring the model to run in real time using Simulink Real-time. In HIL simulation, you use a real-time computer as a virtual representation of your plant model and a real version of your controller.
Extensive details on preparing Simscape models for real-time simulation, solver selection, workflows can be found here:
0 commentaires
Cette question est clôturée.
Voir également
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!